Presented For Sale By:
Presented For Sale By:
|Location||Palma de Mallorca, Spain|
|Tax Status||Tax Not Applicable|
|Length at Water Line||15.82 m|
|Max Draft||3.61 m|
|Min. Draft||3.61 m|
|Engine Make||Volvo Penta|
|Fuel Tanks||240 litres|
|Fresh Water Tanks||150 litres|
The Swan 601 is a high-performance racer cruiser that is as competitive today as when the first boats were launched in 2006. Full carbon construction utilizing SPRINT technology has kept the displacement to a very modest 18,000 Kg despite the full cruising interior as expected on every Nautor’s Swan yacht.
Cherokee is always maintained by her captain and every system is replaced, upgraded or improved, as an example:
- New engine in 2016
- Fisher Panda 8kv 2012
- New Batteries Gel 2016
- New rudder bearings 2016
- New panels and roof 2016
- B&G Hercules 3000 upgrade in 2011
Swan 601-08 Cherokee
The hull is of built in a female mould using unidirectional carbon fibre Sprint layers vacuum bagged and oven cured.
Foam cored topsides and single skin underwater.
Structural bulkheads are of Nomex honeycomb cored carbon fibre epoxy pre-preg construction. Stiffeners are carbon lay-ups with unidirectional flanges and double bias webs.
Engine beds are of CFRP with steel inserts. Flotation reference marks at bow and stern.
Bottom treated with epoxy primer for improved blistering resistance, and antifouled.
Sea cocks of plastic for all through-hull connections below waterline, closing flush with outside and located in accessible positions.
Faired using long boards and epoxy primer, blue painted Boot and cove stripes white
Faired using long boards and coated with white antifouling paint
Original keel with narrow steel fin and lead bulb. Keel bolts are of high-tensile stainless steel.
Fin CNC machined from high-tensile stainless steel. Bulb and Fin faired.
Dual steering gear, sheaves provided with guards to prevent jamming. Lightweight steering quadrant bolted to rudder stock.
Two 1.2 m destroyer type carbon fibre wheels, 1.7 turns H.O to H.O.
Pedestals with roller bearings and friction brake. Emergency tiller stowed in lazarette.
Foam filled rudder blade with carbon fibre skins and stock, supported by two self-aligning bearings.
The ergonomic design on deck ensures the clean, sleek lines of the boat are unbroken and adds to her capacity for high-speed sailing. Deck is of carbon fibre Sprint sandwich construction with foam core, vacuum bagged and oven cured. Glued deck/hull joint. High-density core under deck fittings.
Laid 9mm teak on side and bridge deck, cockpit sole and seats 30mm toe rail forward of chainplates.
Deck surfaces are painted in whiteDeck Equipment
Rollers for three pairs of forward stanchions. Fairleads integrated into stanchions.
Three removable Aluminium mooring cleats, one forward and two aft. Pulpit, pushpit and lifeline stanchion 640 mm high of stainless steel. Socket for flag pole.
Composite mast collar.
Stemhead fitting and chainplates
Stemhead fitting for asymmetric spinnaker and code 0.
Carbon fibre chain plates bonded to hull and to reinforced structural knees.
Hatches and Windows
Hinged fore deck hatch to deck stowage
Flush hinged sail hatch and openable deck hatches of composite construction. Flush side windows.
Main companionway sliding hatch of tinted acrylic with sliding drop-board. Aft deck hinged GRP hatch to lazarette.
The lazarette is separated with a watertight bulkhead from the interior. Open stowage in lazarette with separate locker for LPG tanks.
Primaries: 2x Carbon 80 3-speeds with overdrive box Centre removable pedestal.
Mainsheet: Carbon 80 3-speed with over drive box
Centre mainsheet pedestal clear coated and twisted carbon 2 x Secondary winches: 68/ 3 speeds carbon self-tailing
2 x Halyard winches: 68 / 2 speed carbon self-tailing
2 x Traveller winches: 44 / 2 speed aluminium self-tailing
Anchoring and Mooring
Lewmar V5 removable anchor windlass.
On the port side of the bow is a removable SS anchor roller One Fortress FX85 (20 kg) anchor, stowed below deck.
10 m of 10 mm (3/8") high-tensile anchor chain. 100 m of 25 mm plaited nylon anchor line.
Six air fenders with lines. One boat hook stowed below. Portable anchorlight
Interior joinery is finished in hand rubbed satin varnished teak with new white painted composite panelling. Varnished Bamboo floorboards (cruising)
Overhead lined with removable panelling (new 2016)
Opening deck hatches are fitted with roller blinds and mosquito screens
Upholstery – foam mattresses for fixed berths and thick foam mattresses for pipe berths. Textile covers with zippers
Exterior and interior cushions
Double berth on centre the bed and drawers are all completely removable for racing
Seats either side aft of berth. Hanging locker and cupboards. Watertight collision bulkhead forward of the bed.
Ensuite head with integrated shower, teak grating on floor, washbasin, mirror, storage lockers and electrical marine WC with fresh water
L-shaped settee in saloon on port side with teak and carbon finished dining table
Settee (berth) on starboard side. Cushion / headboards on the forward bulkhead both sides. Locker with acrylic shelves for bottles and glasses on starboard side of saloon, aft of which is a wet locker.
Carbon companionway steps.
L-sofa in saloon on port side. Settee (berth) on starboard side. Cushion/headboards on the forward bulkhead both sides. Black covers for chain-plates. Wood saloon table with sliding/removable bench seat.
Carbon companionway steps.
2 x overhead carbon hand rails. Ocean Air blinds on overhead hatch.
Guest / Day washroom area
Guest / day head area which is fitted out with a stainless Wash-basin, mirror, shower, lockers, teak floor gratings and a Tecma marine WC, lies between the two aft cabins
Located aft of the saloon on port side in the passage to the aft cabin. The galley has ample work space and storage. The work tops areCorian
There is an insulated and sheathed space for stove with extractor hood over. Equipment includes:
Four burner Force 10 gas stove with oven, gimballed and provided with fiddles. Stainless steel sinks. Garbage container.
Front loaded refrigerator and a top loaded freezer (both DC driven) Lockers behind sinks with plate racks for draining and storage.
Aft of the galley to port and aft of the guest head on starboard a doorway leads into the two aft cabins. Each cabin has: a twin V berth and also a “pipe cot” over with an adjustable rope tackle system attached to the hooks in the ceiling; also a seat and lockers.
Navigation desk with under desk storage Under seat storage
Mac Mini Computer 2016
Storage area behind mounted computer screen
Emergency cupboard behind the seat with grab bag, first aid etc Hanging cupboard with rain jackets and 8 inflatable life vests
Volvo Penta D2-75 marine diesel engine 2016, 53 kW (70 HP) at 3000 RPM with Sail Drive 150 S Gori 4-blade folding propeller
Engine space internally sound insulated, fire resistance meeting SOLAS B-15 requirements. Propeller area sound insulated.
Shut-off valves for each fuel tank.
Fuel valve chest with return valve for each tank.
Fuel filter/water separator with water alarm on feed line to engine. Tanks are vented to deck edge.
Fuel tanks are of 2 x PVC and one stainless, inspection covers, sounding plug, and vent pipes. Total fuel capacity 240 litres
Fresh-water: 150 litres
One holding tank aft , Hot water tank 22 litres.
Sea water hoses of reinforced PVC tubing. Fresh water piping of nylon and copper tubing. Water tanks of PVC.
Shower sump tank is of plastic.
Galley spout with foot pump for salt water.
Water can be heated either with engine cooling water or with a heating element working on AC. Water tank level gauges. Tank vent pipes terminate at galley sink.
Single lever mixing faucets type Oras for washbasins, galley sinks, and showers. Water-maker Sea Fresh Ocean 400 (removable for racing) 30 litres per hour. 24v
Sinks and wash basins
Galley sinks drain through sea cock. Wash basins and showers drain to sump tank forward cabin only.. Sump tanks are emptied by electrical pumps.
Toiletsusing salt water or fresh water for flushing, and discharging to holding tanks (aft only) or direct overboard with level indicator
New freshwater flushing electric Jabsco WC in forward cabin head Holding tank (aft) emptied by electrical pump or deck suction line.
Ceiling fan in Saloon and fwd head
Two hand pumps 100 litres / minute. Outlets above waterline.
One electric bilge pump in main sump, Forepeak automatic electric bilge pump.
50 amp shorepower system Fisher Panda 8KV
Water heater, 1 kW
Outlets, provided with earth fault protection switch
Air-conditioning individual in each three cabins and saloon
Larger battery capacity 490Ah, instead of standard 350Ah
24 V DC system with insulated return. Wires are dimensioned to minimise voltage drop. 230V AC is a three-wire system.
A lightning protector on the masthead is connected with heavy cable to a keel bolt.
The service batteries are charged by an 80 Amp alternator on the main engine or by a 50 Amp shore powered battery charger with automatic regulation.
The main engine starting batteries are charged by a separate 55 A engine alternator.
2 x boom lights, one over forward cockpit table and one at aft end of the boom. Interior down lighters in all cabins Halogen
Lopo LED navigation lights.
Chargers/Inverters Mastervolt 75A charger Mastervolt 2500W inverter
B&G Hercules 3000 (2011) system including Performance processor
Paddle wheel speed
5 x FFD displays – one at chart table and four outside (2 aft by the helms and 2 at the forward end of the cockpit).
2 x analogue wind displays 5 x 20/20 repeaters on mast Halcyon Gyro compass
B and G Loadcell pin
Auto pilot (2011)
B&G auto pilot, type 3 drive unit. Control panel by the port helm. System is removable for racing. Simrad AP27 control head with plug-in GRP box in port side of cockpit.
SUUNTO 135 mm magnetic compasses, one on each steering pedestal.
Mini MAC with centralite
Icom IM423 DSC VHF at the chart table
Hall Spars mast and spars built of carbon fibre and painted white
Double spreader semi-fractional rig with discontinuous shrouds and 20 deg. swept spreaders. One carbon fibre spinnaker pole and two carbon fibre jockey poles
Of oval section, with external track / luff groove for mainsail Tapered masthead with 2:1 main halyard sheave.
Jib and spinnaker halyard sheaves. Hall spars’ standard 5 display bracket:
The mast is stepped through the deck onto a carbon fibre mast step. Carbon fibre anemometer wand
Flat regatta boom in carbon fibre
2 x Navtex three-function one-gauge central control panel with two-speed pump in aft cockpit for backstay, outhaul, and vang.
Hydraulic mast jack with shims and removable manual pump.
Standing riggingRod standingrigging
Tie rods from mast collar to step.
The racing headstay has a Tuff luff with twin groves Full inventory of running rigging available on requestEQUIPMENT
General equipment Wheel and pedestal covers Cockpittable
Rope bags, Winch handles Passarelle
Owner's Manual in English including manuals supplied by equipment manufacturers.
The Owner’s Manual contains directions for use, maintenance and winterising as well as drawings and diagrams for main systems.
Sounding rods for fuel and water tanks. Two suction lifters for floorboards.
Carbon Flag pole
Plumbing spare parts. Engine spare parts. Electrical spare parts. Engine tool kit. Dinghy Zodiac Zoom with Yamaha outboard 9.9hp and a custom cover
Softex total flooding system for engine space with remote control at main companionway. Two portable extinguishers in interior.
Two webbing jackstays. Liferaft
Used three times
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information. This vessel is offered subject to prior sale, price change,or withdrawal without notice