Back

American Tug 362

$740,164 Listed price: US$537,500

Presented For Sale By:

American Tugs & Trawlers

800 S Pearl Jensen Way
At The American Tug Factory
La Conner, WA, 98257
United States
360-234-2773

View Seller Inventory
 

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Make American Tug
Model 362
Year 2022
Condition Used
Price US$537,500
Type Power
Class Express Cruiser
Length 10.97 m
Fuel Type Diesel
Hull Material Fibreglass
Location La Conner, Washington, United States
LOA 11.13 m
Length at Water Line 9.91 m
Beam 4.04 m
Max Draft 1.04 m
Dry Weight 18700 lb
Engine Type Inboard
Engine Make Volvo
Engine Model D4-300
Fuel Type Diesel
Engine Year 2022
Power 300 hp
Drive Type Direct Drive
Propeller Type 4 Blade
Propeller Material alloy
Engine usage (hours) 350
Maximum Speed 15 kn @ 3500 RPM
Cruising Speed 7.5 kn @ 1750 RPM
Range 1000 nmi
Additional Equipment
  • Crane
Electrical Equipment
  • Shore power inlet
  • Inverter
Electronics
  • Depthsounder
  • Radar
  • Log-speedometer
  • Navigation center
  • Plotter
  • Autopilot
  • Radio
  • Compass
  • GPS
  • VHF
  • AIS
Inside Equipment
  • Stern thruster
  • Bow thruster
  • Electric bilge pump
  • Oven
  • Microwave oven
  • Electric head
  • Heating
  • Hot water
  • Refrigerator
  • Sea water pump
  • Battery charger
Outside Equipment/Extras
  • Cockpit shower
  • Tender
  • Solar panel
  • Swimming ladder
Designer Lynn Senour
Builder American Tugs
Guest Cabins 2
Guest Heads 1
Fuel Tanks 2 x 115 gal
Fresh Water Tanks 2 x 60 gal
Holding Tanks 1 x 45 gal
Hull Shape Semi-Displacement
Windlass Electric Windlass
Hull Warranty None

Description

Loaded American Tug 362 

3G's is an  American Tug 362, a best-in-class two-cabin trawler built to handle unpredictable waters with comfort and ease. Based on our AT 365 deck and hull, the 362 draws upon its commercial fishing heritage to deliver excellent seakeeping performance whether you’re venturing from California to Alaska.

Designed to accommodate more than one couple, the 362 features a two-stateroom, single-head layout. This layout, combined with the convertible dinette in the salon, provides sleeping accommodations for up to six people. The 362 pilothouse has been redesigned to feature an LLEBROC helm chair and comfortable seating for two to port. The salon features a linear galley with solid surface countertops, dual sinks, and plenty of storage, offset by a dinette to accommodate generous seating. 

3G's is equipped with the following:

+ bow and stern thrusters

+ Steehead 600 lb crane on the boat deck 

+ Garmin electronics suite, 2 12" MFDs, radar, depth, AIS. ICOM VHF

+ staple rails with a custom fish cleaning station (removable) 

+ trolling valve / slow speed system for engine 

+ downrigger pads and pot puller mount in cockpit with power supplies

+ solar panel

+ full aft overhang

+ 300hp Volvo D-4 engine, 

+ diesel hydronic heat looped through water heater

+ propane stove 

Pilothouse

+ LeBroc Captains chair, swivel and slide with armrests

+ Sapele overhead console

+ Intermittent windshield wipers with self-park and washing system

+ Lighted compass

+ Four hand grab rails, two each forward and aft of pilot house doors

+ LED lights throughout overhead

+ Defrost fan on console

+ 12v and 110v outlets

+ Fusion stereo system with AM/FM/Bluetooth

+ Two stereo speakers

+ Four opening windows and screens

+ Sliding pilothouse doors with windows and screens

+ Large console with electronics

+ Hatch allowing access to the engine room

Salon / Galley

+ Dinette converts to a double bed with storage under

+ Salon table

+ Pleated day/night shades

+ Three opening windows with screens

+ Hatch allowing access to the tank room

+ Propane, two burner stove / oven 

+ Isotherm refrigerator / freezer

+ Microwave oven

+ Hard Surface countertop with stainless sink

+ Multiple 110v outlets

+ Drawers and storage cabinets

+ Cutting board custom fit to sink

Forward Cabin

  • Center island queen berth, lifts for storage below
  • Cedar lined hanging locker to starboard and port
  • Reading lights at head of berth
  • Three-way switching for overhead lights
  • Two round stainless steel ports with screens
  • 110v outlet and USB outlets
  • Ocean Air Sky Screen for Bomar hatch

Guest Cabin

  • Double berth (76” x 45”)
  • Hanging locker and 2-drawer dresser
  • Reading lights at head of berth
  • One round stainless-steel port with screen
  • 110v outlet and USB plug

Head

  • Fresh water 12v toilet
  • Vanity with storage and stainless sink
  • Large fiberglass stall shower
  • One round stainless-steel port with screen

Interior Finish / Trim

  • Sapele paneling in pilothouse
  • Sapele valances in salon and pilothouse
  • Cabinets trimmed in solid Sapele
  • Overhead and walls in marine grade vinyl with foam backing
  • High quality snap-in carpeting

Heat/Air Systems

  • 1000w electric heater in salon
  • Diesel hydronic furnace for cold weather 

Mechanical Systems


+ Side-power 6hp twin prop bow thruster with joystick control

+ Side-power 4hp twin prop stern thruster with joystick control

+ Side-power remote control (bow and stern thrusters)

+ Solar panel

+ Stainless steel prop shaft with dripless shaft seal

+ 4 blade propeller CNC-machined to class “S”

+ Composite rudder and skeg

+ Wet/underwater exhaust

+ Seawater strainer

+ Racor filter for main engine

+ Automatic water pressure system

+ Sound deadening in engine and tank room

+ Three 2000gph bilge pumps with automatic float switches

+ Waste discharge system with macerator

+ Electronic shift and throttle system

Electrical System

  • Remotely controlled battery switching
  • AC/DC Distribution panel with back lighting 
  • Battery combiner system for charging
  • Inverter / Charger Magnum Energy (2000W)
  • Three 4-D AGM batteries for house (600amp hours)
  • One 4-D AGM battery for the main engine start
  • 30-amp shore power service with power cord
  • Electric horn
  • International navigation lights LED type
  • 12v LED courtesy lights throughout the boat
  • 12v LED overhead lighting throughout the boat

Steering System

  • Stainless Edson helm wheel
  • Autopilot valve system installed
  • SeaStar Hydraulic pump and cylinder
  • Integral rudder port with bearing and dripless seal

Tankage

  • Tank monitoring system for all tanks
  • 120 gallons water in FDA approved poly tanks
  • 11 gallon water heater 
  • Taste/odor filter for galley fresh water
  • 45 gallon waste tank
  • Two aluminum fuel tanks (230 gallons total) each with sight glass and valves

Deck

+ Steelhead 600 Crane on boat deck 

+ 1-1/2” waste and water fittings

+ 2” fuel fills

+ 316 stainless steel 1-1/4” bow rails with stainless steel burgee staff

+ 316 stainless steel 1-1/4” sundeck rails and ladder

+ 316 stainless steel bow roller assembly

+ Bomar hatch in trunk cabin

+ Color matched powder coated aluminum framed and sliding or hinged doors

+ Access hatch to lazarette in cockpit

+ Seawater Washdown system in bow and cockpit

+ Swim Platform with stainless steel edge guard

+ Transom door

+ Four stainless steel fender cleats

+ Molded non-skid walking surfaces

+ Molded fiberglass mast

+ Propane locker in cockpit

+ Molded fiberglass deck box on bow

+ Full overhang over cockpit with ladder and hatch to upper deck

+ Bull Frog 10' Yacht Tender with 15hp Tohatsu four stroke outboard with electruc start

+ Custom downrigger mounts with 12v power in each corner (boat has a trolling valve) 

+ High/low mount for a shrimp pot puller to port with dedicated 12v power supply

Safety and Mooring


+ Main engine spare parts kit

+ Two portable fire extinguishers

+ Four fenders and mooring lines

+ 44lb anchor

+ Auto fire extinguisher in engine room with auto engine shut-down system

+ Lofrans Project 1000 anchor windlass 1000w/12v with 50’ of 5/16” H.T. galvanized chain and 200’ 9/16” line.

Hull


  • Solid hull laminate
  • Black hull-guard with stainless steel insert
  • Black anti-fouling paint (two coats)
  • Painted boot stripe
  • Molded composite skeg protects props and supports rudder

Accomodations

The American Tug 362 has a two-cabin & one-head arrangement.  The convertible dinette in the salon makes into a third nicely sized double bed, the AT-362 sleeps six and is perfect for families, grand-kids and fishing friends.

Floors are molded fiberglass and fitted carpets are included.

Cabinetry is our traditional American Tug quality full-face framed wood joinery in a shaker style.

As you enter the salon from the aft-cockpit, the galley is on starboard and the dinette is on the port side.  The galley is inline with plenty of counter space.  A two-burner stainless Force-Ten LPG stove and oven is included.  A stainless steel sink with pressure hot/cold water is mounted in the sold surface counter top.

Port aft in the salon is the Isotherm side by side refer & freezer.  This is a 7 cu/ft high efficiency DC unit, it is quite large.  The dinette is generously sized and converts to a nice large double berth. The table can fold for additional space, a filler cushion and backrest is included that converts the forward and aft facing dinette into a U-shaped lounger.

Up three steps and you are in the raised pilothouse with full 360-degree visibility.  There are port & starboard sliding doors.  On port is the co-pilot station with chart table and seating for two.  On the starboard side is the pedestal helm chair for the pilot.  Nice electronics console will accommodate 1 or 2 twelve-inch multi function displays.

Down three steps and you are in the cabin area.  Forward is the master cabin with center-line queen berth.  There is storage under the berth.  Hanging lockers on both sides of the cabin are built in our shaker style wood joinery.

The guest stateroom is on the port side of the forward companionway.  There is a nice standing area with a hanging locker outboard.  The double berth is aft and located under the pilothouse, generous double berth is 76" long and 48" wide with plenty of room above.  A portlight will bring in fresh air and light.  This stateroom is sized for a couple to be comfortable, and similar in sizing to the aft master stateroom found on a 40-foot sailboat.

The head with large stall shower is on starboard and opposite the guest stateroom.  Electric head in the corner, a vanity cabinet outboard with sink.  Stall shower in the starboard forward corner.  Head is made of fiberglass with acrylic door for easy care.

Options

  • 4-Hook Line Holder
  • 15” hand grab
  • Razor Shaft Line Cutter
  • Cockpit Shower
  • Steelhead 600lb crane

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. Some options may be visible in the photographs. Specifications and equipment may change as the boat is developed.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Show More…

Presented For Sale By:

American Tugs & Trawlers

800 S Pearl Jensen Way
At The American Tug Factory
La Conner, WA, 98257
United States
360-234-2773

View Seller Inventory
 

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Presented For Sale By:

American Tugs & Trawlers

800 S Pearl Jensen Way
At The American Tug Factory
La Conner, WA, 98257
United States
360-234-2773

View Seller Inventory
 

One-click Contact

X
* We weren't able to post your message, please check the highlighted fields and try again.

Thanks

We have sent your information directly to the seller.

Request cannot be completed

You may have entered incorrect information or the server is temporarily down. Please reload this page and try again later.

Services

X