Chittum Skiffs 18 Snake Bight

Additional

ADVANTAGES of CARBON FIBER 

The 100% carbon fiber construction significantly enhances the Chittum 18 Snake Bight's performance and handling by making it lighter, stronger, stiffer, and stealthier than traditional fiberglass skiffs. These properties are crucial for a high-performance flats boat. 

 

Performance Benefits

• Increased Speed and Fuel Efficiency: The significant weight reduction (potentially 20% or more compared to a fiberglass equivalent) allows the boat to achieve higher top speeds and plane faster with less horsepower. This also translates into better fuel economy at cruising speeds.
• Shallower Draft: The lighter hull causes the boat to sit higher in the water, enabling it to access extremely shallow fishing spots that heavier boats cannot reach.
• Improved Poling and Tracking: The reduced weight and increased stiffness make the skiff exceptionally easy to pole. It tracks straight yet can be spun quickly and silently with minimal effort from the push pole, a key advantage when positioning for a shot at a fish.
• Stealth: The hull design, combined with the material's properties, is engineered to minimize noise and the "pressure wave" that can alert spooky fish in shallow water.
• Smoother Ride: Contrary to some assumptions that heavier boats ride better, the carbon fiber skiff's stiffness helps it cut through waves more efficiently, providing a smooth and controlled ride even in choppy conditions. 

Handling and Durability

• Enhanced Responsiveness: The lighter weight provides better overall handling and responsiveness, making the boat feel more nimble and easier to control on the water.
• Superior Structural Integrity: Carbon fiber has a much higher strength-to-weight ratio and stiffness compared to E-glass fiberglass. This allows the builder to use less material while achieving a stronger, more stable hull that can withstand the demands of aggressive use.
• Increased Durability and Longevity: The material is highly resistant to corrosion and fatigue in saltwater environments, contributing to a longer service life and reduced maintenance needs compared to traditional materials. 

DIMENSIONS:

• Length Overall: 18 ft
• Beam: 6 ft 8 in
• Deadrise at Transom: 12 degrees

Vessel Details

Hull

 

• 100% Carbon Fiber (585lbs  No Engine) 
• 3 Hatch Layout
• 12 Degree Deadrise
• 8" Hull Pad
• 23 Gallon Fuel Tank
• Sliding Tackle Organizers  

 

Pre Rigging 

 

• Custom Black Powder Coated Hardware 
• Custom Removable Bracket on Bow 
• Wire and Rig to Bow  

 

Engine/Mechanical 

 

• Yamaha 70 HP Custom Custom Painted Black (68 Hours)
• Serviced 2025 
• Jack Plate TH Marine 
• 24V Trolling Motor MINN KOTA PILOT with Foot Controls. 

Console 

 

• Upgraded Console to small Cooler Console with Seat, Ice Chest and Cushion Set 
• Edison Black Steering Wheel
• SeaStar Steering
• Electrotab Membrane Trim Tab Switch
• Acrylic Console Door Black
• Knot Tying Ring on Console
• Smart Charger 
• Lithium ION Battery 

 

ELECTRONICS 

• 9” Simrad GPS 
• Stereo with 2 JL Audio 8.8 and Amp
• Wm4 module for Sirrus Weather 
• NEMA Run to Electronics 
• Through Hull Transducer with Temp 
• Auxiliary Antenna  

 

Casting Platform and PipeWork Upgrades 

 

• Poling platform with step - Black Powder coated.
• 2 piece Spider with custom seat with high back - Black Powder coated.
• Casting Platform - Black Powder coated.
• Low profile grab bar - Black Powder coated
• Arm rest on console seat.
• Black Powder coat all aluminum
• 21/ Stuffy Cabron Push Pole 
• Tibor Caddy Stbd side Tab 

 

Color

 

• Hull Color – Kingston Gray 
• Deck Non Skid – Whisper Gray 
• Deck Trim – Whisper Gray 
• Liner Trim – Whisper Gray 
• Liner Non Skid – Whisper Gray 
• Console – Whisper Gray  

 

Rigging Upgrades and Options 

 

• 5 gallon Water Tank in Bow with Pump Plugged and Rigged 
• 4 Lifting Eyes with Backing Plates 
• Arm Rest in Console Seat 
• Rule 1500
• V Marine Push Pole Holders 
• Under Gunnel and Deck Courtesy Lights
• Gray SeaDek with Black Trim on Platforms
• Carbon Fiber Trim Tabs
• Spare Prop with Carrier Box 
• Ionic Jump Start 
• 4 Rod racks facing AFT on Port Side
• 4 Rod racks facing AFT on STBD side.

  

CANVAS and CUSHIONS

 

• All Cushions are Carbon Fiber Gray
• Aft Cushion Custom Oversized 
• Full Custom Boat Cover to Fit Trolling Motor 

 

Trailer

Custom Swing Tongue RAM-Lin Black Trailer Fitted to Boat. 

Mechanical Disclaimer

Engine hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters.  The broker cannot guarantee the true hours.  It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.