Hewescraft 220 Ocean Pro ET HT
One-click Contact
XPresented For Sale By:
Northwest Marine and Sport
United States
| Make | Hewescraft |
|---|---|
| Model | 220 Ocean Pro ET HT |
| Year | 2025 |
| Condition | New |
| Price | Request Price |
| Type | Power |
| Class | Aluminum Fish |
| Length | 8.13 m |
| Fuel Type | Gas |
| Hull Material | Aluminum |
| Location | Pasco, Washington, United States |
| LOA | 8.13 m |
|---|---|
| Beam | 2.59 m |
| Dry Weight | 3600 lb |
| Engine Type | Outboard |
|---|---|
| Engine Make | Yamaha |
| Engine Model | 250hp |
| Fuel Type | Gas |
| Engine Year | 2025 |
| Power | 250 hp |
| Max Passengers | 9 |
|---|---|
| Fuel Tanks | 1 x 100 gal |
Description
This 2025 Hewescraft 220 Ocean Pro HT ET is paired with a 2025 Yamaha 250hp outboard and sits on a 2025 EZ Loader trailer. Here is a list of all the optional equipment added to her -
Hard top w/fish curtain
Carpet: Cabin side wall, gray
i3MM hiback, 10" storage box, medium duty susp. w/swivel& slide
42" sleeper benches w/cut out for commode - Port side
Swim Ladder Welded to ET
Yamaha multi-function gauge
Rod holders: side cabin - set of 2, 3 station - fixed
Stern Rails w/Downrigger Brackets
Livewell: Rear ET deck fish box
Ski pylon w/utility tray
Anchor Guard: Bow, Treadplate
LED courtesy lights: 2 at transom - 1 at console
EZ Loader galvanized tandem axle bunk trailer - T102BT 23-25 5700
- Hydraulic disc brakes
- Spare Tire & Carrier
- Load Guides
- Transom Tie Down Straps
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Standard Equipment
Anodes: Installed on port transducer bracket
Battery Selector Switch
Bilge Pumps: Two bilge pumps, one auto, one manual
Bow Eye: Double, welded
Bow Deck: Self-bailing
Bow Rails: Aluminum - 12"
Cleats: 8", welded - 7
Cupholders: Port and Starboard
Decals: 15" vinyl striping with graphics
Fish Box: In floor with macerator pump
Fish Box: 40 gallon in transom with cutting board lid
Fuel System: 100 gallon
Glove Box: Lockable
Grab Handles: Inwale front port side, glove box & windshield
Handrails: Vertical, aft cabin sides
Instrument Panel:
- Six water-resistant rocker style switches
- Fuel gauge and knock out panels for 4 additional gauges
- Power Point
- Twelve-gang expansion fuse block
Lights: LED, two overhead, interior cabin
Lights: LED, navigational
Lights: LED, anchor, removable
Paint: Light gray, full inside
Pre-rig: Single binnacle with multi-function gauge
Seats: High-back, dry box w/lid, swivel, horseshoe suspension
Steering: Hydraulic, Baystar, 150HP or less
Steering Wheel: Stainless steel with rubber grip
Stern Eyes: Welded, port and starboard
Storage: Anchor locker in bow
Storage: Hinged treadplate step between consoles
Storage: Lockable, under console
Storage Tray: Front, port and starboard
Transom: Single 25"-shaft engine and 20"-shaft kicker
Transom Door: Walk-through, starboard side
Transducer Bracket: Port and Starboard
Trim Tabs: Electric 9"x12" with LED indicator
Windows: Screened, sliding side windows
Presented For Sale By:
Northwest Marine and Sport
United States
Presented For Sale By:
Northwest Marine and Sport
United States
