Rare Cotre Marconi
Contact Seller
XPresented For Sale By:
| Make | Rare |
|---|---|
| Model | Cotre Marconi |
| Year | 1947 |
| Condition | Used |
| Price | €50,000 |
| Type | Sail |
| Class | Cruiser |
| Length | 10.26 m |
| Fuel Type | Diesel |
| Hull Material | Wood |
| Location | Toulon, Var, France |
| Tax Status | Tax Paid |
| LOA | 10.26 m |
|---|---|
| Length at Water Line | 8.67 m |
| Beam | 2.75 m |
| Max Draft | 1.8 m |
| Min. Draft | 1.8 m |
| Dry Weight | 5600 kg |
| Total Sail Area | 52.6 m² |
| Cabin Headroom | 1.8 m |
| Engine Type | Inboard |
|---|---|
| Engine Make | Volvo |
| Engine Model | Volvo Penta MD2 |
| Fuel Type | Diesel |
| Power | 25 kW |
| Drive Type | Direct Drive |
| Engine Location | enums.engine-location.center |
| Propeller Material | Bronze |
| Covers |
|
|---|---|
| Electrical Equipment |
|
| Electronics |
|
| Inside Equipment |
|
| Outside Equipment/Extras |
|
| Rigging |
|
| Sails |
|
| Designer | Talma Bertrand |
|---|---|
| Builder | Vernazza |
| Guest Cabins | 1 |
| Guest Heads | 1 |
| Seating Capacity | 6 |
| Fuel Tanks | 1 x 50 litres |
| Fresh Water Tanks | 1 x 80 litres |
| Hull Shape | Monohull |
| Windlass | Electric Windlass |
| Hull Warranty | None |
Description
IF is a beautiful wooden sailing yacht of the Marconi cutter type built between 1940 and 1947.
Classified as a Historical Monument and still sailing today, its home port is Toulon (83)
The construction of IF began in 1940 at the Emile Chasseigne shipyard and was completed in 1947 at the Vernazza shipyard for the Armateur de Saint Mathurin, probably based on plans by Emile Chasseigne inspired by architect Talma Bertrand.
The teak deck has been fully restored as well as the planking ten years ago.
The mast is made of Oregon pine as well as the boom and the spinnaker pole.
The Volvo engine runs very well, starts on the first turn, and has good compression.
The Dacron sails (mandatory in the gauge) are 20 years old and in very good condition.
The sailboat is equipped with a mainsail, a Yankee genoa, a staysail, as well as an asymmetrical spinnaker "ballooner", all cut by Gateff in 2002/2003.
- Mainsail 35m2 Dacron 8 oz in 0.70m panels with 3 reefs cut Fancut classic.
- Yankee 31m2 Dacron 7.2 oz cut Fancut classic
- Staysail 11m2 Dacron strong Warp 300g/M2 cut Fancut.
- Ballooner 73m2 nylon 1.2 oz white cut chevron. (Handling sock)
Additional Information
The company provides information regarding this vessel in good faith but is not able to guarantee the accuracy of this information or the condition of the vessel. It is the buyer's responsibility to instruct their agents or experts to verify and validate the information of their choice. This vessel is offered subject to prior sale.
