Mystic 60

Specifications

CONSTRUCTION

RCD Status:

•    Our understanding is that the yacht is exempt from the essential safety requirements of Directive 94/25EC (Recreational Craft Directive) as she was first placed into service with the EEA prior to 16th June 1998.

Hull Construction:

•    Built in Taiwan by Ta Shing for Alan Morgan Yachts (Mystic Yachts)

•    Built American Bureau of Shipping 1-A Plus

•    Approved stability book

•    Rolly Tasker Sails GRP moulded hull with integrated stub keel and rudder skeg

•    Sandwich construction

•    Hand-laid vinylester Kyntex laminate

•    Divinycell closed cell foam core material

•    Vinylester laminate formed internal structural members

•    Additional structure in way of keel pan to provide additional support for the larger keel

•    Bulkheads laminated to hull with Vinylester laminate overlays, hand consolidated

•    Laminate teak sheer strake

•    Underwater hull epoxy coated in 2013/14 refit

•    Topsides finish in AwlGrip custom mixed blue two-pack paint (2014)

Deck & Superstructure Construction:

•    GRP moulded deck incorporating coachroof superstructure and self-draining cockpit

•    Sandwich construction

•    Hand-laid vinylester laminate

•    Divinycell closed cell foam core material

•    Deck moulding finished in Awlgrip two-pack paint

•    12mm thick, swept planking, Burma teak deck laid in 2014

•    Burma teak toe rail and capping rails

•    Stainless steel framed portholes and portlights

•    Stainless steel cowls for deck ventilator dorade boxes

Keel & Rudder:

•    Performance version of keel, deeper fin profile with bulb

•    GRP moulded stub keel

•    Lead Antimony ballast keel bolted to stub keel

•    Stainless steel keel bolts

•    Skeg mounted, GRP moulded, fully balanced rudder

•    Stainless steel rudder stock

MACHINERY

Engine & gearbox:

•    Perkins 6.3544M marine diesel engine

•    130hp

•    6 cylinders, naturally aspirated, indirectly cooled

•    Borg Warner Velvet Drive hydraulic reversing marine gearbox

•    Single lever morse control on the pedestal

•    Cooling water is provided via sea chest

Maintenance & Performance:

•    Engine last serviced spring 2024

•    Engine overhauled in 2011/12

•    Rebuild works included : head removed, de-coked, new valves and head rebuilt. 

•    Approximately 2,500 hours running since the rebuild

•    Total running hours approximately 11,000 hours

Propulsion & Steering:

•    Stainless steel propellor shaft

•    4-blade, bronze, Max Prop feathering propellor

•    Cable drive steering system – spare set of custom-made steering cables stowed aboard

•    Stainless steel wheel with leather trim

•    Wooden emergency tiller

Bow Thurster:

•    Sidepower Thurster

•    Tunnel mounted

•    Joy stick type controller on the pedestal

Autopilot:

•    B&G Hydra Autopilot system

•    Hydraulic drive pump

Generator:

•    Kohler 9EFOZ marine generator

•    9kVA, 50Hz

•    Yanmar, 3 cylinder, naturally aspirated diesel engine

•    Remote control and monitoring panel

ELECTRICAL SYSTEMS

Voltage systems:

•    12VDC onboard power system – Provide via dropper for instruments only

•    24VDC onboard power system

•    230VAC shore power system

Shore Power System:

•    2x Extension lead to connect to shore supply

•    Adaptors for different supply sockets

•    Single 32 amp connection point

•    Hardwired RCD-protected system

•    230VAC sockets, battery charger, immersion heater

Battery Banks:

•    Engine Battery – 2x 12VDC, 130Ah, AGM batteries – supplying 24VDC

•    Domestic Battery – 4x 12VDC, 230Ah, AGM batteries – supplying 24VDC (2025)

•    Genset Battery – 1x 12VDC, 80Ah battery

Battery Monitor:

•    Mobitronic battery monitor displays for each battery bank

Charging:

•    Victron Centaur battery charger

•    230VAC – 24VDC 60amps

Inverter / Charger:

•    Heart combi inverter/charger

•    230VAC – 12VDC, 50amp charger

•    12VDC – 230VAC inverter, 2000w

Alternators:

•    Single engine driven 24VDC alternator

•    Alternator smart charging controller (2025)

Other Electrical:

•    12VDC charging socket at the nav station

PLUMBING SYSTEMS

Fresh Water:

•    Pressuried hot and cold water systems

•    Filters for pressurised system

•    Mixer tap in galley

•    Manually pumped fresh water tap in galley

•    Mixer tap and dedicated shower and bath taps in master cabin en-suites

•    Mixer taps extending for use as shower heads in both forward heads

•    Hot water provide from calorifier heated by engine cooling water or immersion heater

Salt Water:

•    Manually pumped salt water tap at galley sink

Black Water:

•    Heads can discharge directly overboard or to holding tanks

•    Two forward heads connected to the forward holding tank

•    Aft heads connected to aft holding tank

•    Holding tanks discharging overboard with macerator pump

Grey Water:

•    Shower/bath drains all plumbed to holding tank

•    Forward tank for both forward heads

•    Aft tank for aft heads

•    Tanks discharging overboard with macerator pump

Bilge Pumps:

•    Manual Bilge Pump x2

•    Electric Bilge Pump – x2, auto and manual switching

•    Bilge pump operation alarm

•    Portable electric pump

•    Petrol salvage pump

Deck Wash:

•    Pressurised salt water wash system

•    Located forward for washing anchor chain and mooring gear

•    Fresh water deck wash located forward

TANKAGE

Fuel:

•    Four tanks in total

•    Stainless steel tank construction

•    Approximate total capacity 900ltrs

•    Tanks fully drained and cleaned June 2025

•    Fuel distribution manifold

Fresh Water:

•    Four tanks in total

•    Stainless steel tank construction

•    Approximate total capacity 800ltrs

•    Water distribution manifold

Black Water Tanks:

•    Two independent tanks

•    Stainless steel tank construction

•    Not used in current ownership

Grey Water Tanks:

•    Two independent tanks

•    GRP tank construction

Tank Monitoring:

•    Tank level indicators for water and fuel tanks

NAVIGATION & COMMUNICATION EQUIPMENT

On Deck:

•    Depth/Speed/Log/Wind – 2x B&G Triton 2 displays, installed 2025 along with new cabling and transducers

•    Plotter – Garmin UHD2, can be used in cockpit or at chart table

•    Plotter/Radar – B&G Zeus2 9” MFD mounted at pedestal (2025)

At Chart Table:

•    Depth/Speed/Log/Wind – B&G Hydra 2000 displays x2

•    Plotter – Garmin UHD2 can be moved down from cockpit

•    GPS – Cetrek GPS display

Port Forward Cabin:

•    Repeater – B&G Hydra repeater

Communications Equipment:

•    DSC VHF – B&G V70 with integrated AIS (2025)

•    VHF – Icom M45EURO

•    SSB – Furuno FS1550 receiver – not used in current ownership

DOMESTIC EQUIPMENT

Galley:

•    Stove – Force 10, 4-burner with oven gas cooker, gimbal mounted

•    Microwave – Whirlpool Max Microwave 230VAC

•    Fridge – Built-in, top-loading, Gruinart, sea water-cooled system. Fully insulated

•    Freezer – Built-in, top-loading, Gruinart, sea water-cooled system. Fully insulated

•    High-quality crockery, cutlery, pots, pans and galley utensils.

Heads:

•    Toilets – Electric flush marine toilets in all three heads

•    Wash hand basins x3

•    Mixer taps x3

•    Shower fittings x3

Heating & Ventilation:

•    Air conditioning system with reverse cycle to provide heat

•    Outlets in all cabins, saloon and galley

•    Mosquito net covers for all deck hatches

•    Insect screens for all portholes

•    Mosquito net to cover cockpit

Lighting:

•    Overhead lighting throughout interior

•    Engine room lighting

•    Reading lights in way of all bunks

•    Low-level courtesy lighting

Entertainment:

•    Radio/CD head unit with speakers in saloon and cockpit

•    TV in master cabin, connectivity for auxiliary inputs

•    TV and DVD player in saloon

ACCOMMODATION

 

Summary of Accommodation:

•    Double cabin forward with jack’n’jill en-suite heads access

•    Symmetrical twin / triple cabins forward with en-suite heads

•    Full-width saloon with saloon table and coffee table

•    Nav Station

•    Linear galley

•    Master aft cabin with ensuite heads, including bath

•    Single-level sole throughout interior with 1.85+ headroom

Accommodation Finish:

•    Teak joinery work finished in a satin varnish

•    Bulkheads finished in an off-white paint with varnished teak trims

•    Hull sides lined in T&G style wood panels, finished in an off-white

•    Corian worktops in galley

•    Corian countertop in master cabin en-suite

•    Brushed stainless steel splashbacks in galley

•    Vinyl covered panels to finish headlining

•    Traditional style hardwood soleboards, teak veneer on plywood panels, all lifting to provide access to bilge space beneath

•    Upholstery throughout covered with denim blue suede Alcantara

•    Leather effect fitted covers for all seating

•    Leather effect covers for tables in the saloon

•    Teak sole gratings in heads compartments

•    Sprung mattresses for all cabins with zip covers

•    Curtains for all portlights and port holes

•    Roller blinds fitted for all deck hatches

•    Lee cloths fitted to all fixed berths

•    Lightweight duvets, pillows and bed linen for all cabins

•    Selection of general linen

•    Monogrammed hand, bath and beach towels

Description of Accommodation from Forward:

Forward Cabin:

•    Cabin accessed from port cabin and heads

•    Double V-berth forward

•    Shelf overhead, outboard, above aft end of bunks

•    Countertop aft of bunks to port, space beneath for washing machine to be installed if required (plumbing still in place), lockers above countertop outboard

•    Hanging locker aft of bunk to starboard

•    Access beneath bunk to bow thruster

Port Midships Cabin: 

•    Accessed from port side of saloon forward

•    Single berth outboard longitudinally

•    Lower bunk can convert to an occasional double

•    Fold down single berth above. 

•    Three, front access lockers beneath lower bunk

•    Countertop unit inboard centrally with drawers beneath

•    Hanging locker forward of countertop

•    En-suite access to heads forward

•    Walk through heads to access the forward cabin

Port Forward En-suite Heads:

•    Accessed from the forward end of the port cabin, providing a walk-thru to the forward cabin

•    Heads provides en-suite facilities for both port forward and forward cabin

•    Marine toilet mounted outboard aft

•    Corner countertop unit forward with inset stainless steel wash hand basin

•    Mixer tap extending out for use as shower head

•    Vanity lockers with mirror doors outboard above countertop

Starboard Midships Cabin:

•    Accessed from starboard side of saloon forward

•    Single berth outboard longitudinally

•    Three, front access lockers beneath lower bunk

•    Lower bunk can convert to an occasional double

•    Fold down single berth above. 

•    Countertop unit inboard centrally with drawers beneath

•    Hanging locker forward of countertop

•    En-suite access to heads forward

Starboard En-suite Heads:

•    Accessed from forward end of starboard cabin

•    Marine toilet mounted outboard aft

•    Corner countertop unit forward with inset stainless steel wash hand basin

•    Mixer tap extending out for use as shower head

•    Vanity lockers with mirror doors outboard above countertop

Saloon:

•    Full-width saloon occupying the space between the forward bulkhead and the companionway aft

•    U-shaped saloon settee to port wrapping around the saloon table

•    Fixed saloon table with bottle storage in the central section, accessed from top of table

•    Two swivelling armchairs inboard

•    Selection of storage lockers outboard of settee forward and aft

•    U-shaped lounging style settee to starboard wrapping around a coffee table

•    Fixed teak coffee table inboard of settee

•    Two teak barrel-style stools for use at table

•    Storage lockers outboard of settee forward and aft

Nav Station:

•    To starboard side, aft of companionway

•    Aft facing navigators seat

•    Chart table extending aft, table top lifting to provide chart storage

•    Instruments mounted in cluster wrapping around chart table with plotter/radar displays outboard of navigators seating

•    Storage beneath navigators seat and drawers below table forward.

•    Ships switch panel inboard of chart table

Galley:

•    To port side aft of the saloon

•    Linear galley running aft and providing walk-thru to master cabin

•    Worktops inboard and outboard.

•    Double stainless steel sinks inset to inboard worktop centrally

•    Stainless steel splashbacks running the length of worktop

•    Selection of drawers and lockers beneath inboard worktop

•    Worktop forward, outboard with in-built, toploading fridge and freezer beneath, front access to fridge below worktop

•    Gimbal-mounted gas cooker aft

•    Section of worktop aft of cooker with microwave built in above worktop level, outboard

•    Storage drawers beneath aft section of worktop

•    Selection of crockery storage outboard of worktop with lockers above.

Master Cabin:

•    Located aft, accessed through galley to port side

•    Island-style double bunk aft

•    Standing room forward of bunk

•    Countertops outboard of bunk to port and starboard 

•    Curved single-seat outboard of bunk, forward, to port and starboard

•    Bookshelves outboard of settee backs with lockers aft

•    Countertop unit forward of settee to port with drawers beneath and locker outboard

•    Dresser unit forward of seating to starboard with dedicated, swing-out stool

•    Access to en-suite heads forward to starboard

Master Cabin En-suite Heads:

•    Thwart ships heads compartment located to starboard side

•    Inboard facing toilet located outboard, aft, concealed within moulded seating unit

•    Countertop forward with Corian moulded wash hand basin and mixer tap

•    Storage lockers and drawer beneath the countertop

•    Shower stall at the inboard end of the compartment

•    Shower tray doubling as a bath if desired, teak plinth surrounding tray with dedicated shower fitting and mixer tap.

Workshop:

•    Located aft of the navigation station on starboard side.

•    Workbench outboard with vice

•    Storage shelves outboard of work bench with storage rack beneath using storage boxes.

•    Access to engine space inboard.

•    Engine space can also be accessed by door at forward end in way of companionway with removable panels in galley providing additional access to the port side of the engine

DECK EQUIPMENT

Rig:

•    Performance version of rig, approximately 2m taller than standard

•    Keel stepped, triple spreader, cutter rig. 

•    Alloy mast and spars manufactured by Antal

•    Spars finished in AwlGrip custom mixed blue, two-pack paint (2014)

•    Stainless steel rod rigging, fully replaced in 2014

•    Reckmann roller reefing system on forestay, removed, stripped and overhauled in 2018

•    Reckmann roller reefing system on the inner forestay, fitted new in 2003

•    Harken main sail track and car system for slab reefing mainsail

•    Hydraulic, stainless steel vang, stripped and overhauled with new seals in 2014

•    Hydraulic backstay tensioner with Navtec remote control panel located in cockpit

•    Backstay insulators fitted with backstay in use as SSB antenna

•    Spinnaker pole, stowing on mast track

•    Running backstays, in spectra, tensioned on cockpit winch

•    Harken mainsheet track and car system

•    Harken stainless steel turning blocks for sheets

               

Winches:

•    Primary Winches – 2x Andersen 68, electric, two-speed, self-tailing

•    Secondary Winches – 2x Andersen 58, two-speed, self-tailing

•    Mainsheet Winches – 2x Andersen 52, two-speed, self-tailing

•    Runner Winches - 2x Andersen 52, two-speed, self-tailing

•    Mast Foot Halyard Winches – 2x Andersen 52, electric, two-speed, self-tailing, 

•    2x Andersen 58, two-speed, self-tailing

Sails:

•    Mainsail – Ocean-quality dacron with leather protection in areas of high wear. Fully battened, Harken mast car system. Rolly Tasker Sails

•    Yankee – Ocean-quality dacron with leather protection in areas of high wear. Roller reefing with white UV strip. Rolly Tasker Sails

•    Staysail – Ocean-quality dacron with leather protection in areas of high wear. Roller reefing with white UV strip. Rolly Tasker Sails

•    Cruising Chute – Fitted with snuffer, lightly used

General:

•    Double stainless steel bow roller

•    Stainless steel pulpit rail with walk-thru boarding step for bow too mooring

•    Deck-mounted stainless steel stanchions supporting double-tier guardwires

•    Guardwire gates to port and starboard sides

•    Stainless steel mooring cleats forward, midships and aft, 8 in total

•    Anchor lockers forward and aft of windlass, with deck hatches to access

•    Dorade ventilator to port and starboard of coachroof forward with stainless steel protective hoops and cowls.

•    Liferaft secured in cradle centrally forward of mast

•    Stainless steel granny bars fitting to port and starboard sides of mast

•    Halyard and reefing winches mounted outboard of mast aft to port and starboard

•    Teak grab rails mounted on coachroof sides

•    Ventilators to port and starboard sides, aft of mast

•    Moulded coaming wrapping around the cockpit with teak top 

•    Primary and secondary winches mounted outboard of the coaming

•    Bench seating to port and starboard sides of the cockpit 

•    GRP helm pedestal housing engine dash panel  and plotter/radar display

•    Varnished, teak cockpit table, folding leaves to port and starboard, central bottle storage and glass rack

•    Coachroof extending aft of cockpit with mainsheet track and winches mounted on coachroof

•    Stainless steel folding swimming ladder, deploying on port side at guardwire gate

•    Lazzarette locker beneath aft deck

•    Swept stainless steel radar arch bridging transom as part of custom-built pushpit railing, including ‘G&T’ seating to port and starboard

•    Outboard storage bracket to port

Covers, Cushions & Canvas:

•    Sprayhood – Blue material with windows forward

•    Bimini – Blue material

•    Pedestal Cover

•    Sun Shade – Netting type screen for cockpit

•    Cockpit Cushions – Fitted set of cushions with backrests in cream material with terry towelling covers

•    Sun Bathing Cushions – Set of three cushions for use on aft or foredecks

•    Cockpit Table Cover

•    Liferaft cover

Anchoring & Mooring:

•    Bower Anchor – Bruce 120lbs anchor on 12mm chain, 75m long rode (Chain replaced 2025)

•    Kedge Anchor – CQR 75lbs anchor on chain/warp rode

•    Spare Anchor – Lightweight folding type anchor

•    Anchor Windlass – Lewmar electric windlass with chain gypsy and warping drum

•    Fenders – Selection, all fitted with socks

•    Mooring Lines – Selection

•    Passarelle – Stainless steel folding passarelle with teak grating, mounted on transom.

•    Anchor Ball day signal

•    Motoring Triangle day signal

Tender & Outboard:

•    Davits – Simpson Lawrence stainless steel davits

•    Dinghy – Inflatable dinghy, hard transom (2024)

•    Outboard – Suzuki 6hp, 4-stroke outboard

SAFETY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

Life saving:

•    Liferaft #1 – 8 Person cannisterStowing on stainless steel deck cradle forward of mast with hydrostatic release. Requires service

•    Liferaft #2 – 6 Person valise. Requires service

•    Horseshoe lifebuoy x2

•    JonBouy inflatable danbuoy module

•    Smoke alarm system

•    Gas alarm system with integrated shut-off solenoid

•    Engine space fire extinguisher system with operation alarm. Manual or auto-deployment

Disclaimer

Grabau International Scotland offers the details of all vessels in good faith but cannot guarantee or warrant the accuracy of this information or warranty the condition of any vessel and the details do not constitute a part of any contract. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. All vessels are offered subject to prior sale, price change, or withdrawal without notice. Grabau International Scotland provides professional yacht conveyancing and legal transfer of title for all yachts as per the ABYA Code of Practice with all deposit payments and final balance payments processed through secure dedicated client accounts solely for that purpose. Our dedicated client accounts are written in trust at Natwest Bank and we are fully insured.