Beneteau First 25.7

FIRST 25.7

ES

Extended hull lines, fixed or lifting keel and a generous sail plan with no compromise on comfort.

 

EN

Extended hull lines, fixed or lifting keel and a generous sail plan with no compromise on comfort.

 

DE

Verlängerte Rumpflinien, Fest- oder Hubkiel und ein großzügiger Segelplan ohne Kompromisse beim Komfort

 

PL

Wydłużone linie kadłuba, stały lub podnoszony kil i obszerny plan ożaglowania bez kompromisów w zakresie komfortu.

More information

HULL:

• Laminated GRP monocoque hull.
• A structural inner moulding made of unidirectional materials is bonded and laminated to the hull at various points. This plays an important structural role in absorbing loads and pressure points (shroud chain stays, keel, rudder, etc.) throughout the structure, distributing them to reduce stresses in the hull.
• The surface material of the inner moulding makes it easier to clean and provides a better finish.
• The hull gel coat is white in colour.
• The deck is of sandwich construction of fibreglass/balsa/polyester resin for a better balance between stiffness/lightness and optimal insulation.
• All working and circulation areas are treated with "Picot" anti-slip coating.
• An inner moulding is bonded to the inside of the deck to improve its finish.
• Cast iron keel GTE 1,45m
• One rudder blade

COCKPIT & RIGGING:

• Sport mast
• Jib furling system
• Adjustable boom counter
• Adjustable backstay
• Rigging 1 deck spreaders
• 2 Harken 16.1 STA winches
• 2 Vaiven for adjusting the genoa clew carriages
• 2 reefing outlets forwarded to cockpit
• Cockpit lockers
• Bathing ladder
• Teak tiller
• Spinnaker rigging + spinnaker pole
• New rigging 2022
• ONE" sails 2022/2023
• Lazy Back
• Carbon boom for gennaker
• Regatta rigging

INTERIOR:

• 1 cabin & marine toilet
• PVC upholstery Fregate Creme in saloon
• ILE upholstery in cabin
• Wooden shelves in saloon
• Double berth in saloon
• Saloon table with folding wings
• Stowage in forward cabin
• Folding hatch in toilet
• Fresh water tank
• 50l fridge in galley

 

YACHT CLUB PACK:

• Mainsheet rail
• Teak slatted cockpit benches
• Bulkhead compas
• Stainless steel bow toe cap and sheave

 

ELECTRONICS PACK:

• Bidata ST40 speedometer, speedometer, depth sounder, speedometer, depth sounder
• Wind vane
• VHF radio

More information

HULL:

• The laminated fiberglass monohull.
• An interior structural molding made with unidirectional materials is bonded and laminated to the hull at several points. This plays an important structural role by absorbing loads and pressure points (stays of the shroud, keel, rudder, etc.) throughout the structure, distributing them to reduce stresses on the hull.
• The surface material of the interior molding facilitates cleaning and provides a better finish.
• The hull's gel coat is white.
• The deck is constructed with a fiberglass/balsa/polyester resin sandwich for better balance between stiffness/lightness and optimal insulation.
• All working and circulation areas are treated with "Picot" non-slip coating.
• An interior molding adheres to the inside of the deck to improve its finish.
• Keel casting GTE 1.45m
• A rudder blade

COCKPIT & RIGGING

• Sport mast
• Furling headsail
• Adjustable boom vang
• Adjustable backstay
• 1 level of spreader rigging
• 2 Harken 16.1 STA winches
• 2 adjustments for genoa sheet cars
• 2 reefing lines led to the cockpit
• Lockers in the cockpit
• Swim ladder
• Teak tiller
• Spinnaker rig + spinnaker pole
• New rigging 2022
• Sails "ONE" 2022/2023
• Lazy Back
• Carbon bowsprit for gennaker
• Racing rigging

INTERIOR:

• 1 cabin & marine WC
• PVC Fregate Creme upholstery in the salon
• ILE upholstery in the cabin
• Wooden shelving in the salon
• Double berth in the salon
• Salon table with folding wings
• Storage in the bow cabin
• Hinged hatch in the bathroom
• Freshwater tank
• 50l fridge in the kitchen

YACHT CLUB PACK:

• Main sheet rail
• Teak slatted cockpit benches
• Bulkhead compass
• Stainless steel bow fitting and block

ELECTRONICS PACK:

• Bidata ST40 speedometer, log, sounder
• Wind vane
• VHF radio

More information

HULL:

• The laminated fiberglass monocoque hull, a structural inner mold made of unidirectional materials, is connected and laminated at various points with the hull. This plays an important structural role by absorbing and distributing loads and pressure points (shrouds, keel, rudder, etc.) throughout the structure to reduce stresses in the hull. The surface material of the inner mold facilitates cleaning and provides a better finish.
• The deck is constructed in sandwich design from fiberglass/balsa/polyester resin to achieve a better balance between stiffness/lightness and optimal insulation. All working and traffic areas are equipped with a "Picot" anti-slip coating. An inner strip is glued to the underside of the deck to improve its surface.
• Cast keel GTE 1.45m
• One rudder blade

 

COCKPIT & RIGGING:

• Sport mast
• Jib roller reefing system
• Adjustable boom counter
• Adjustable backstay
• Rigging 1 deck spreader
• 2 Harken 16.1 STA2 winches
• Trolley adjustment for jib-genoa clew
• 2 reefing exits leading to the cockpit
• Cockpit lockers swimming ladder
• Teak tiller
• Spinnaker rig + spinnaker mast
• New rigging 2022
• ONE" sails 2022/2023
• Lazy back
• Carbon boom for gennaker
• Regatta rig

 

INTERIOR:

• 1 cabin and marine toilet
• PVC frigate cream upholstery in the salon
• ILE upholstery in the cabin
• Wooden shelves in the salon
• Double berth in the salon
• Salon table with folding wings
• Storage space in the forward cabin
• Folding hatch in the toilet
• Freshwater tank
• 50-l refrigerator in the galley

 

YACHT CLUB PACKAGE:

• Main sheet rail
• Teak wood-clad cockpit benches
• Bulkhead compass
• Bow tip cap and stainless steel rope pulley
  
  

ELECTRONICS PACKAGE:

• Bidata ST40 speedometer, speedometer, echo sounder,
• Speedometer, echo sounder
• Wind vane
• VHF radio

Additional information

HULL:

• Laminated GRP shell hull.
• The internal structural form made of unidirectional materials is bonded and laminated to the hull at various points. This plays an important structural role in absorbing loads and pressure points (stays, keel, rudder, etc.) throughout the structure, distributing them to reduce stress in the hull.
• The surface material of the internal strip facilitates cleaning and provides a better finish.
• The deck has a layered construction of fiberglass, balsa, and polyester resin, which provides a better balance between stiffness and lightness and optimal insulation.
• All working and circulation areas are covered with a non-slip "Picot" coating.
• The internal strip is glued to the interior of the deck to improve its finish.
• Cast iron keel GTE 1.45 m
• One rudder fin

COCKPIT AND RIGGING:

• Sport mast
• Furling system for the jib
• Adjustable boom counter
• Adjustable backstay
• Rigging for 1 deck spreader
• 2 Harken 16.1 STA2 winches
• Winches for adjusting the genoa sheet trolley
• 2 reefing exits forward to the cockpit
• Storage in the cockpit
• Swim ladder
• Teak wood tiller
• Spinnaker rigging + spinnaker mast
• new arcia 2022
• Sails "ONE" 2022/2023
• Lazy Back
• Carbon boom for the gennaker
• Racing rigging

INTERIOR:

• 1 cabin and marine toilet
• Fregate Creme PVC upholstery in the salon
• ILE upholstery in the cabin
• Wooden shelves in the salon
• Double berth in the salon
• Table in the salon with folding wings
• Storage in the bow cabin
• Folding hatch in the toilet
• Freshwater tank
• 50l refrigerator in the galley

YACHT CLUB PACKAGE:

• Mainsheet track
• Teak benches in the cockpit
• Bulkhead compass
• Bow roller and stainless steel roller

ELECTRONICS PACKAGE:

• Bidata ST40 log, speedometer, depth sounder
• Anemometer
• VHF radio

Disclaimer

ES

La Compañía ofrece los detalles de esta embarcación de buena fe, pero no puede garantizar ni asegurar la exactitud de esta información ni garantizar el estado de la embarcación. El comprador debe dar instrucciones a sus agentes, o a sus peritos, para que investiguen los detalles que el comprador desee validar. Esta embarcación se ofrece sujeta a venta previa, cambio de precio o retirada sin previo aviso.

 

EN

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

 

DE

Das Unternehmen bietet die Details dieses Schiffes in gutem Glauben an, kann aber weder für die Richtigkeit dieser Informationen noch für den Zustand des Schiffes garantieren oder haften. Der Käufer sollte seine Agenten oder Gutachter anweisen, die vom Käufer gewünschten Details zu überprüfen. Dieses Schiff wird vorbehaltlich eines Zwischenverkaufs, einer Preisänderung oder eines Rückzugs ohne vorherige Ankündigung angeboten.

 

PL

Firma oferuje szczegóły dotyczące tego statku w dobrej wierze, ale nie może zagwarantować dokładności tych informacji ani zagwarantować stanu statku. Kupujący powinien poinstruować swoich agentów lub rzeczoznawców, aby zbadali takie szczegóły, jakie kupujący chce zweryfikować. Ten statek jest oferowany z zastrzeżeniem wcześniejszej sprzedaży, zmiany ceny lub wycofania bez powiadomienia.