Beneteau First 21.7 S

Additional Description

PACK ELECTRONIC RAYMARINE

• Tridata Loch speedo sounder ST 60+

Additional Description

• Self draining cockpit
• 2 wet lockers with locks
• 2 solid wood footrests on cockpit benches
• Solid wood tiller with jointed extension

Additional Description

INTERIOR

• Woodwork Alpi Blond oak
• Parquet and polyester type laminated non-slip floors
• Vinyl fabric spar ceiling on deck counter-moulding

COMPANIONWAY

• Headroom: 1.45 m
• 1 sliding companionway hatch with fitted window
• Space for storing table (saloon/cockpit)

FORWARD CABIN

• Double bed (1.90 m x 1.40 m) - Foam mattress with cover
• Cubbyholes and storage space
• Cabin/saloon separation curtain
• 1 circular opening deck hatch

SALOON

• Headroom: 1.45 m
• 2 bench seats / SIngle berths (2.20 M x 0.60 M) with mattress and cover
• Storage
• 2 oilskins pegs
• 2 fixed hull portholes

Additional Description

• 1 battery 12 V, 50 Amp
• 1 electrical 12 V and 6 function panel with fuses
• Navigation lights
• Lighting: Ceiling lights and lamp fittings

Additional Description

• Sink with drain
• Space for cooker
• Storage

Additional Description

• Design made following European Directive requirements and according to EC certification.
• Monolithic hull design in polyester
• Structural counter moulding made with unidirectional fabrics laminated and stuck evenly to the hull
• Deck made of injection moulding (Fibreglass sandwich / Balsa wood / Polyester resin)
• Accessible areas covered in a «Picot» type non-slip surface
• Solid unhewn wood footrest, stuck and screwed, forms the deck hull join
• Cast iron keel, pivoted and adjusted with a manual system of lifting screw and handle. Mounted with adjustable plates
• 2 retractable polyester rudders with sleeve system
• Grey coloured hull - Anthracite grey hull decoration

Additional Description

RIGGING

• Standard mast 9/10 electro-polished aluminium installed on the deck, 1 level(s) of advanced cross trees
• Anodised aluminium boom
• Discontinuous stainless steel standing rigging
• Shroud and lower shroud plates fixed to the deck hull join
• Single back-stay with cross-bracing adjusted by tackle
• 1 mainsail tackle mounted on snap shackle in cockpit bottom
• 1 Kicking strap
• 1 trimming tackle on boom
• Genoa furler
• 2 genoa sheet tracks with back and forth adjustable bearing car
• Rigging run back to cockpit
• Complete running rigging: 1 Genoa furler line, 1 Genoa halyard, 1 Main halyard, 2 reef lines
• 2 cheek blocks
• 4 clutches
• 1 Jam cleat
• 2 Belaying cleats
• 2 jamming cleats

WINCHES

• 2 aluminium winches (H08A): Genoa sheet, halyards and reef lines
• 1 winch handle(s)

MOORING -ANCHORING

• Self-bailing chain locker
• 1 Stainless steel bow fitting 1 stainless steel bow roller
• 4 Aluminium mooring cleats

Disclaimer

The company provides information regarding this vessel in good faith but is not able to guarantee the accuracy of this information or the condition of the vessel. It is the buyer's responsibility to instruct their agents or experts to verify and validate the information of their choice. This vessel is offered subject to prior sale.