Mylius 65 RS
One-click Contact
XPresented For Sale By:
Grabau International
United Kingdom
| Make | Mylius |
|---|---|
| Model | 65 RS |
| Year | 2017 |
| Condition | Used |
| Price | €1,500,000 |
| Type | Sail |
| Class | Sloop |
| Length | 20.35 m |
| Fuel Type | Diesel |
| Hull Material | Composite |
| Location | Olbia, Sassari, Italy |
| Tax Status | Tax Paid |
| LOA | 20.35 m |
|---|---|
| Length at Water Line | 18.1 m |
| Beam | 5.28 m |
| Max Draft | 3.5 m |
| Min. Draft | 2.8 m |
| Keel Type | enums.keel-type.kt-lifting |
| Displacement | 21200 kg |
| Ballast | 7850 kg |
| Engine Type | Inboard |
|---|---|
| Engine Make | Yanmar |
| Engine Model | 6BY3-160 |
| Fuel Type | Diesel |
| Engine Year | 2017 |
| Power | 160 hp |
| Drive Type | Direct Drive |
| Propeller Type | 3 Blade |
| Propeller Material | Bronze |
| Engine usage (hours) | 1303 |
| Additional Equipment |
|
|---|---|
| Covers |
|
| Electrical Equipment |
|
| Electronics |
|
| Inside Equipment |
|
| Outside Equipment/Extras |
|
| Rigging |
|
| Sails |
|
| Designer | Alberto Simeone |
|---|---|
| Builder | Mylius Yachts Srl |
| Guest Cabins | 4 |
| Guest Heads | 4 |
| Fuel Tanks | 1040 litres |
| Fresh Water Tanks | 1040 litres |
| Holding Tanks | 40 litres |
| Windlass | Electric Windlass |
Description
Raised saloon carbon fibre Mylius performance cruiser from the board of Alberto Simeone with 2018 launch, versatile 4-cabin, 4-heads interior layout and a comprehensive cruising specification including in-boom furling and telescopic fin keel.
FURTHER BROKER’S COMMENTS:
Custom built for her current owner, launched in the Spring of 2018, and used almost exclusively for day-sailing during the summer months in and around Sardinia, MY SPACE shares the same hull design as the rocket-ship Mylius 60FD but with a more cruising-orientated cockpit and saloon arrangement. Her raised saloon allows her engine and mechanical systems to be moved below floor level, lowering and centralising her centre of gravity while also increasing usable interior accommodation space.
Configured for effortless short-handed sailing, MY SPACE has a push-button in-boom furling and jib furling rig along with furling Code 0 for off wind sailing. Easily handed from her twin helm positions aft, her guest cockpit area is left free of ropes and clutter and is the ideal place for friends and family to relax in safety and comfort.
Constructed in carbon epoxy sandwich, MY SPACE has an incredibly light displacement of just over 20 tonnes along with a form stability designed to minimise heal under sail, further increasing cruising comfort. Her telescopic keel also allows for convenient anchoring in shallower harbours with her 3.50m sailing draft reducing to just 2.80m.
Below decks, MY SPACE benefits from a versatile 4-cabin, 4-heads interior layout, allowing her to accommodate large families, groups of friends and either with or without crew aboard.
Her specification highlights include:-
• Spring 2018 launch
• Privately owned and sailed with just one owner since new
• 4-cabin, 4-heads interior layout finished with teak joinery
• Carbon epoxy sandwich hull, deck and superstructure construction
• Teak laid side decks
• Telescopic lead fin keel with 2.80-3.50m draft
• Twin carbon fibre rudders with Jefa steering system
• Yanmar 6-cylinder 160hp diesel engine with shaft drive and 3-bladed Brunton folding propeller
• MaxPower retractable bow and stern thrusters
• CZone systems monitoring
• Mastervolt combination battery chargers and inverters
• Fischer Panda 12kw generator
• Schenker 24vDC watermaker
• B&G navigation instruments with chart plotter displays at both helms and chart table
• Radar
• Climma reverse-cycle air-conditioning and heating system
• Multiple fridges and freezers
• Dishwasher
• Washing machine
• Retractable TV in saloon
• Tecma electric heads plus bidet in owner’s cabin ensuite bathroom
• Hall Spars carbon fibre mast and Park Avenue furling boom
• Push buttons controls at helm for backstay, outhaul, vang and staysail halyard piston
• Harken electric sub-deck jib furler
• Harken Performa powered winches
• Millennium Sails membrane mainsail, jib and staysail
• Furling Code 0
• Tender garage with 2.90m inflatable tender (max capacity 3.20m jet tender)
• Fore and aft retractable capstan winches for easy mooring
• Opacmare retractable gangway
• Bimini and sprayhood
ABOUT THE MYLIUS 65’:
Completely re-designed from the experience of the Mylius 19E95, the new Mylius 65’ is the prestigious creation of Mylius shipyards for ship owners who wish to buy a sailboat of about 20 meters, with unique style, quality and performance.
The yacht is available in Flush-Deck (FD) or Raised Saloon (RS) versions, characterized by the elegant mezzanine lounge space.
The new Mylius 65 features a better sail area/displacement ratio and slightly more waterline length in comparison with its predecessor. The hull is also significantly beamier, especially in the aft sections, with more form stability, offering improved downwind pace and better directional stability when sailing at high speeds.
The increased form stability was a key goal with the new design, not only while racing with a crew on the rail but, maybe even more important, in cruising mode when a more ‘relaxed’ smaller crew can benefit from the comfort of less heel.
Even with its luxurious fit-out, this new 65 displaces just 20 tonnes with its carbon construction, less than any other boat of this type. She is a perfect example of the modern fast cruiser-racer, a yacht with a full cruising interior that is also ready for serious racing.
Hull, deck, ribs, bulkheads and chainplates are all constructed in carbon-PVC sandwich, with solid laminate in the areas of keel, mast, rudder and engine. All composite elements employ an epoxy matrix tailored for the yacht. The design’s structural analysis is based on ISO 12215, all carefully optimised using finite element (FEA) analysis. The lamination of hull and primary structure is also validated at various stages using NDT ultrasonic checks. The interior elements complement the overall structure in terms of rigidity and robustness.
ABOUT MYLIUS YACHTS:
Mylius was born in 2003 from a dream and the love for sailing of three men. Mario Sassi, Alberto Simeone and Mauro Montefusco always lived sailing as their big passion. After various professional experiences in other sectors, they launched a completely new company, able to reflect their way of living and loving the sea.
From the end of 2011, the Mylius SRL was 51% owned by the Twinpack Group, world leaders in the packaging industry, based in Podenzano near Piacenza. This was the best way of celebrating the long-lasting relationship between Luciano Gandini, President of Twinpack and now Mylius too, and the three founding partners.
The new headquarters, inaugurated in March 2015, consists of an area of over 17,000 square meters with six production and two office buildings, plus a private heliport. The lamination’s activities take place in Poland, in a structure of about 10,000 sq.m. with about 40 people, in partnership with Rega Yacht, highly specialized in composite construction, with an experience of almost 100 boats.
In the new shipyard in Podenzano several interesting synergies are implemented between two very different and very complementary industries. The shipbuilding experience and design excellence of Mylius are now combined with a solid industrial base, able to respond to all production requirements and technological challenges. Also thanks to these synergies, many ideas and projects are springing up, with a constant growth also in international markets.
Full Sales Inventory
CONSTRUCTION
RCD Status:
• The yacht complies with the EU’s Recreational Craft Directive and is categorised CE certification A.
Hull and deck Construction:
• Full Carbon fibre construction with PVC foam core in and epoxy matrix with vacuum-bag and post-cure techniques laminated in female mould
• White painted topsides and superstructure
• Bulkheads and deck are glued to the hull through structural epoxy adhesives
• 8mm teak laid side deck, cockpit seating, sole and bathing platform
Keel & Rudder:
• Lead ballast retractable telescopic keel with 2.80-3.50m draft variance
• Twin carbon fibre rudder blades
MACHINERY
Engine & gearbox:
• Yanmar, 4-stroke, water-cooled diesel engine 6BY3-160 6-cylinder, common rail, turbocharged diesel engine producing (117kw) 160hp @ 2,800 rpm
• Yanmar KMH50A hydraulic actuated multi-friction disc clutch.
• ZF electronic single lever throttle controls at starboard helm pedestals.
• Racor fuel filters
Service & Maintenance:
• Engine hours – approx. 1,303 at the time of the listing.
Propulsion & Steering:
• Bruntons 3-bladed folding propeller
• MaxPower 24vDC retractable bow and stern thrusters
• Twin carbon fibre helm pedestals with Exit carbon wheels and instrument panels with backlit rig control buttons
• Jefa steering system
ELECTRIAL SYSTEMS
Voltage systems:
• 24vDC primary domestic system with 12vDC starting circuit and 220v AC via generator, inverter or shorepower.
Battery Banks:
• 6x 12vDC 260Ah service batteries joined in parallel and series to supply 780ah @ 24vDC – 2024
• 24vDC bow thruster battery bank – 2023
• 24vDC stern thruster battery bank – 2025
• 12vDC engine start battery
• 12vDC generator start battery – 2021
Charging / Inverter:
• 2x Mastervolt Mass Combi Ultra 245/3500/100 100Amp automatic battery chargers with integrals 3,500w inverters
• Mastervolt EasyView5 touchscreen display controlling Mastervolt system at chart table
Generator:
• Fischer Panda 1500 12kw 220vAC 50Hz diesel generator.
• Generator hours – approx. 942 at the time of the listing
Alternators:
• 12vDC engine mounted alternator
• 24vDC 150Amp engine mounted alternator – replaced 2025
Shore Power:
• 220v shore power supply with ring main
Other Electrical:
• USB and 220vDC sockets connection
• CZone control system with display at chart table
• Engine start battery with parallel from the service battery bank in case of emergency
PLUMBING & GAS SYSTEMS
Fresh Water:
• Hot & cold pressurised water supply with 24vDC high pressure pump system
• Fresh water connection system from shore
• Hot water produced via engine drive calorifier or via 220vAC immersion heater element in well-insulated hot water tank
Watermaker:
• Schenker Modular 24vDC 210 litres per hour reverse osmosis watermaker
• Watermaker hours - approx. 362 at the time of the listing
Bilge Pumps:
• Electric bilge pumps (main bilge with pipe; engine room, 2x aft tender garage, forward locker)
• Manual bilge pump
TANKAGE
Fuel:
• Approx 1,040 litres fuel capacity in 2x 520 litres stainless steel tanks
Fresh Water:
• Approx 1,040 litres fuel capacity in 2x 520 litres fresh water tanks
Holding Tanks:
• 40 litres black water holding tanks
NAVIGATION & COMMUNICATION EQUIPMENT
In Cockpit:
• 2x B&G Zeus3 9’ chart plotters at helm pedestals
• 2x B&G graphic Display H5000 at helm pedestals
• B&G Halo20 closed-array radar scanner with aluminium bracket installed on first spreader
• B&G core package with wind, speed and depth transducers
• B&G autopilot with control head at port and starboard helm pedestals
• 4x B&G 20/20 HV display at the mast
• Compass
At Chart Table:
• B&G Zeus3 12’ chartplotter
Communications Equipment:
• B&G V50 VHF with DSC
• B&G wireless VHF with external wireless charging station
DOMESTIC EQUIPMENT
Galley:
• Techimpex stainless steel gimballed 4-burner induction hob with oven and grill
• Siemens stainless steel dishwasher
• Front opening refrigerator
• 2x front load drawer refrigerators
• Top-opening freezer beneath floor level
• Stainless steel inset sink with hot & cold pressurised fresh water supply
Heads:
• Tecma 24vDC electric-flush heads with bidet functions
• Bidet in the owner’s cabin heads
• Sinks with hot & cold pressurised fresh water supplies
• Showers
Laundry:
• Smeg 4kgs washing machine
Heating & Ventilation:
• Climma 220vAC reverse cycle air-conditioning system with outlets throughout interior and 50,000 BTU output
Entertainment:
• Folding LCD smart TV
• Stereo with external and internal speakers
Other Domestic Equipment:
• Smeg 4kgs washing machine
ACCOMMODATION
Summary of Accommodation:
• The Mylius 65’RS interior layout provides accommodation for seven to nine guests, having one owner’s cabin forward and two aft for guests, plus a portside guest cabin with bunk beds, all with ensuite head and separate shower stall (starboard aft heads).
Accommodation Finish:
• All the spaces are designed in a contemporary mood, with the balanced and pleasant use of the white lacquered painting surfaces, the preciously handmade finished furniture and floors, built in solid and veneered teak and the high-quality fabric upholstery.
• The spot carbon and steel technical details complete the unique Mylius style in this yacht.
Accommodation layout from Forward:
• The central saloon, directly illuminated by the natural light thanks to the big transparent surfaces and windows, is directly connected to the deck cockpit by the big main entrance and stair.
• Two big sofas are available for dining area and lounge times, equipped with dining and coffee tables.
• The navigation desk and the main control panel area is on starboard side, provided with spacious lockers for different purposes storage.
• The owner’s cabin is located at the foremost part of the yacht with an en-suite bathroom and separate shower stall
• The galley, equipped with all facilities, is on the starboard side and can be closed completely to create a crew quarter.
• The two guest’s suites are located aft, one portside and one starboard.
• The engine room is located underneath the saloon’s floor; its entrance is provided by the folding flooring.
• Lazarette with dinghy garage and stowage aft
DECK EQUIPMENT
Rig:
• Hall Spars Carbon fibre mast and Park Avenue with Bamar electric furling boom
• Keel-stepped fractionally-rigged mast with two sets of swept-back spreaders
• Stainless steel rod standing rigging – checked 2023
• Electro-hydraulic system with push buttons on steering pedestals for backstay, outhaul, vang and staysail bottom piston
• Harken deck gear throughout
• Harken electric sub-deck genoa furler
• 2:1 Self-tacking and longitudinal jib tracks
• Code 0 furler
• Heavy weather jib equipment with piston on the deck, deckfitting and checkstays
• Second mainsail halyard
• P 26.110M, E 8.900M, IG 26.390M, J 7.540M
• ISP: 26.60m
• Main sail area: 135mq
• Jib sail area: 91mq
• Gennaker: 400mq
• Sail area upwind: 226mq
• Sail area downwind: 535mq
Winches:
• 2x Harken Performa 80.2ST 2-speed electric self-tailing primary winches
• 2x Harken Performa 70.2ST 2-speed electric self-tailing winches at the base of the mast
Sails:
• Millennium Sails membrane fully battened inboom furling main sail
• Millennium Sails membrane furling jib
• Millennium membrane staysail – 2018
• Orange Sails furling Code 0
General:
• Pushpit, pulpit and guardwire stanchions with twin Dyneema guardwires and side boarding gates
• Twin teak folding cockpit tables with stainless steel legs
• Transom door with telescopic ladder
• Tender garage with capacity for up to a 320cm jet tender
• Air compressor for tender installed in tender garage
• Tender windlass for hauling in the garage
• Opacmare retractable gangway
• Flush deckhead hatches
• Lazarette locker
• Dedicated storage locker for 6-man liferaft in mid cockpit under the flooring
• Storage installation for watertoys in the aft locker
• Fore and aft retractable electric mooring winches
• Aft poles for bimini cover
• Aft folding seats
• 2x Camera control on the first spreaders of the mast
• Carbon fibre ensign staff
Exterior Lighting:
• Spreader lights
• Cockpit and stopper lights
• Underwater lights
Covers & Canvas:
• Sprayhood with stainless steel frame – 2021
• Folding bimini with stainless steel frame – 2021
• Cockpit cushions
• Cockpit table cover
• Helm wheel covers
• Coach roof cover
Anchoring & Mooring:
• Sub-deck 24vDC electric reversing anchor windlass
• Anchor self-stowing within stainless steel bow fitting on carbon fibre bowsprit
• Delta Anchor with 100 m chain
• Fore and aft retractable 24vDC electric mooring capstan winches
• 8x black anodised pop-up mooring cleats
• Warps and fenders
Tender & Outboard:
• 290cm rigid bottom tender with console
• 20hp Suzuki 20hp 4-stroke outboard engine.
SAFETY EQUIPMENT:
General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.
Life saving:
• 6pp Liferaft
• Lifejackets
• MOB system
• Fire extinguishers
Disclaimer
Grabau International Italia offers the details of all vessels in good faith but cannot guarantee or warrant the accuracy of this information or warranty the condition of any vessel and the details do not constitute a part of any contract. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. All vessels are offered subject to prior sale, price change, or withdrawal without notice. Grabau International Italia provides professional yacht conveyancing and legal transfer of title for all yachts as per the ABYA Code of Practice with all deposit payments and final balance payments processed through secure dedicated client accounts solely for that purpose. Our dedicated client accounts are written in trust at Natwest Bank and we are fully insured.
Presented For Sale By:
Grabau International
United Kingdom
Presented For Sale By:
Grabau International
United Kingdom
