Seascape Seascape 24 / First 24SE

Kabinen

 • Bulkheads and furniture lightly covered with a satin finish top paint and white RAL 9003 gel coat on the molded parts for light, clean and low maintenance finish

Bow section:
•  Double V-berth with insubmersibility volume underneath and custom added air tight hatches
•  Light and ventilation through big foredeck hatch/window

Central saloon area:
•  Bright and spacious main cabin area with large companionway    hatch
•  Long berths/benches with storage place under the front 1.5 m and insubmersibility volume under the rest
•  Covers for the storage area
•  Plexiglas companionway washboard and sliding hatch
•  EVA foam padding on the floor  and keel box
•  Two Wichard folding pad eyes for lifting straps on the keel-box
•  Indoor/outdoor table attachment point on the top of keel-box
• Interior indirect LED lighting
• Control panel with Vicron BMV batery monitor display switches and box under the companionway
• Double USB plug & standard 12V plug
• Masthead tricolor navigation & anchor lights with switches on the control panel
• Faux leather cushions on the front V-berth and saloon side benches in orange color
• Custom cushion on front bed, extra thickness and softness for better sleep
• Wooden sliding berths extensions on both sides of the keel box with cushions in the orange color; they extend the bench to a comfortable berth or offer extra seats; when not in use, panels are stored under the entrance and enable free movements in the saloon
• Indoor/outdoor

KEEL ARRANGEMENT:
• Swinging keel build in GRP vinyl ester composite with lead bulb insert
• Custom made manually operated stainless steel keel winch
• Keel head and edges protected with epoxy primer
• Slotstrip / keel lips closing the exit of the keel box

Custom CREW BAGS (4 PIECES):
• Water repellent, easy-to-hang crew bags
• Attachment points for all (two bags in saloon and two above front V-berth)

Technical equipment

CONSTRUCTION:

• Hull and deck constructed with vacuum infusion of Vinyl ester resin, Airex PVC foam and Soric GRP sandwich with unidirectional and multiaxial laminates
• The hull is reinforced with infused GRP stringers in the keel and in bow sections
• The deck comes with EVA foam decking – RAPTOR
• 8:1 outhaul and two reefs
• Two transoms hung rudders built of GRP foam sandwich and aluminum casings
• Underwater areas applied epoxy primer and antifouling Nautix A4 (hard matrix)
• Antifouling done every season

SAILS:

Main (NorthSail - improved) – 24 sqm
Genaker – red (NorthSails) – 63 sqm
Furling Jib 1 – NorthSails – 15,3 sqm
Furling Jib 2 – OneSail (much better then OEM) – 12,10 sqm
Code5 (A5 furling reacher) – NorthSails (Facnor FX 1500+ furler set with spliced continuous furling line) = 42,5 sqm
LazyBag with smart solutions and zipper for sun tent 

 

MAST and RIGGING:

• Compotech high-quality carbon fiber mast and boom with one set of swept-back spreaders
• Carbon parts UV protected
• Retractable carbon bowsprit controlled from the cockpit
• One tapered mainsheet with mainsheet tackle of ball bearing low
• Friction blocks
• 12:1  boom vang
• Two jib sheets
• One 2:1 Dyneema main halyard
• One Dyneema jib halyard
• One Dyneema fractional spinnaker halyard
• Two reef lines
• One bowsprit control line
• One spinnaker tack line
• Two tapered spinnaker sheets
• One 8:1 cunningham control line
• Facnor FLT jib furler with the furling line
• Mast transport cover
• Compass mounted on bulkhead next to the companionway
• Compass light connected to navigation lights switch

Galley equipment

Portable grill - brunner devil double grill

Deck and hull equipment

Improvements on the sailboat:

• EVA foam covering the entire deck from the renowned American manufacturer Raptor Deck
• EVA foam on the rear bench/cover of the rudders for added comfort
• The boat is approximately 50kg lighter than competitors
• Replaced hinges on covers
• Custom-made carbon instrument mount for the mast
• Fixed 55W solar panel at the front
• Additional 140W portable solar panel with MC PowerPro connection and Ctek connector
• Victron SmartSolar Charge Controller MPPT 75/100 (Bluetooth monitoring via app)
• Victron Battery Monitor BMV-700 (Bluetooth monitoring via app)
• Victron Battery Charger - Blue Smart IP65 Charger (Bluetooth monitoring via app)
• 2x 100Ah LiPoFe4 batteries (200Ah total)
• B&G Vulcan 7R – chart plotter with Fishfinder on a sturdy RAM mount
• Additional Arimar depth sounder/Fishfinder
• Boat monitoring via Sentinel system (boat position, battery status, door status, geofence, logbook)
• Raymarine EV-100 autopilot + P70 display + remote control
• Airmar DST810 depth, speed, and temperature transducer
• Windex and wireless wind instrument on mast
• NMEA2000 backbone kit and wiring
• Carbon legs/supports for the table
• Adjustable rail for added comfort + extra cushions on the rail
• built-in easy to deploy emergency ladder on stern

MAST and RIGGING:

• Compotech high-quality carbon fiber mast and boom with one set of swept-back spreaders
• Carbon parts UV protected
• Retractable carbon bowsprit controlled from the cockpit
• One tapered mainsheet with mainsheet tackle of ball bearing low
• Friction blocks
• 12:1  boom vang
• Two jib sheets
• One 2:1 Dyneema main halyard
• One Dyneema jib halyard
• One Dyneema fractional spinnaker halyard
• Two reef lines
• One bowsprit control line
• One spinnaker tack line
• Two tapered spinnaker sheets
• One 8:1 cunningham control line
• Facnor FLT jib furler with the furling line
• Mast transport cover
• Compass mounted on bulkhead next to the companionway
• Compass light connected to navigation lights switch

Marine Electronics

• Fixed 55W solar panel at the front
• Additional 140W portable solar panel with MC PowerPro connection and Ctek connector
• Victron SmartSolar Charge Controller MPPT 75/100 (Bluetooth monitoring via app)
• Victron Battery Monitor BMV-700 (Bluetooth monitoring via app)
• Victron Battery Charger - Blue Smart IP65 Charger (Bluetooth monitoring via app)
• 2x 100Ah LiPoFe4 batteries (200Ah total)
• B&G Vulcan 7R – chart plotter with Fishfinder on a sturdy RAM mount
• Additional Arimar depth sounder/Fishfinder
• Boat monitoring via Sentinel system (boat position, battery status, door status, geofence, logbook)
• Raymarine EV-100 autopilot + P70 display + remote control
• Airmar DST810 depth, speed, and temperature transducer
• Windex and wireless wind instrument on mast
• NMEA2000 backbone kit and wiring

Additional equipment

Improvements on the sailboat:

• EVA foam covering the entire deck from the renowned American manufacturer Raptor Deck
• EVA foam on the rear bench/cover of the rudders for added comfort
• The boat is approximately 50kg lighter than competitors
• Replaced hinges on covers
• Custom-made carbon instrument mount for the mast
• Fixed 55W solar panel at the front
• Additional 140W portable solar panel with MC PowerPro connection and Ctek connector
• Victron SmartSolar Charge Controller MPPT 75/100 (Bluetooth monitoring via app)
• Victron Battery Monitor BMV-700 (Bluetooth monitoring via app)
• Victron Battery Charger - Blue Smart IP65 Charger (Bluetooth monitoring via app)
• 2x 100Ah LiPoFe4 batteries (200Ah total)
• B&G Vulcan 7R – chart plotter with Fishfinder on a sturdy RAM mount
• Additional Arimar depth sounder/Fishfinder
• Boat monitoring via Sentinel system (boat position, battery status, door status, geofence, logbook)
• Raymarine EV-100 autopilot + P70 display + remote control
• Airmar DST810 depth, speed, and temperature transducer
• Windex and wireless wind instrument on mast
• NMEA2000 backbone kit and wiring
• Carbon legs/supports for the table
• Adjustable rail for added comfort + extra cushions on the rail
• built-in easy to deploy emergency ladder on stern

SAILS:

Main (NorthSail - improved) – 17,40 sqm
Genaker – red (NorthSails) – 49,5 sqm
Furling Jib 1 – NorthSails – 15,3 sqm
Furling Jib 2 – OneSail (much better then OEM) – 12,10 sqm
Code5 (A5  furling reacher) – NorthSails (Facnor FX 1500+ furler set with spliced continuous furling line)
LazyBag with smart solutions and zipper for sun tent

ANCHOR:
• FORTRESS FX-7 with 5m inox chain and 50m anchor rope
• multiple mooring lines

STEERING SYSTEM COVER & BENCH ON THE STERN:
• protective cover of the steering system
• Comfortable bench on the aft of the cockpit for additional seating and sunbathing area in cruising mode
• Very light option, build in GRP with Honeycomb core and EVA foam decking
• Easily removable with pins to reduce weight in racing mode

SPINLOCK TILLER EXTENSION:
• Spinlock tiller extension EA1200

MARINE BEAN BAG:
• Rectangular bean bag for additional comfort on and below the deck
• Spliced fixation rope with snap-shackle

LAZYBAG:
• Lazybag with smart solutions for easier mainsail handling
• Ready-to-roll while under sails, designed to pull lazy jacks to the mast
• Spliced Dyneema lazy jacks with composite shackles attachments
• Zips along with the bag for the sun tent option

CUSTOM SUN TENT (LAZYBAG ASSEMBLY):
• Tent shading for easy installation on the lazy-bag with zipper
• Elastics for attachment on the railing
• Sunbrella fabric with instaled »windows« on both sides with shades
• fiberglas poles for extension and fixation of the cover (standing hight)

TRANSPORTATION LIFTING STRAPS:
• Three lifting straps connected in one single lifting point
• Possible craning with stepped mast, as the boat will tilt slightly forward
• Safety dyneema loop around the mast
• Certified lifting equipment
• custom made winter/transport cover (can be used durring transport or durring storage with option mast up or down)

PROVISIONAL MAST CRANE (A-FRAME)
• Simplifying stepping of the mast without a crane
• Lightweight aluminium powder-coated telescopic A-frame providing provisional crane
• Spliced dyneema ropes with hooks for aft fixations
• Dedicated transport and storage bag

LOK CUSTOMISED TRAILER WITH EQUIPMENT
• Customised trailer with galvanised steel frame
• Homologated for max 1600 kg towing weight
• Single-axis with low profile tires for easier slip launching
• Knott equipment and hand break
• Brakes and dampers for 100km/h admissibility
• Integrated brake drum washing system
• Mast support with a manual winch for launching/recovering the boat
• Aft GRP cradles with EVA foam padding
• Rubber rollers in the middle and pads in the front for easier slip launching
• Front support wheel & aft support leg
• Standard European 13-pin connector
• Spare tire
• Trailer straps pack with pads