Tartan 395

Factory Options

Optional equipment build on this boat:

• Flag Blue Painted Hull
• White deck w/ contrasting nonskid Sand
• Red Boot Stripe
• Gold Cover Stripe
• Blue Bottom Paint
• Hull Rub Strake painted to match Hull
• SS handrails
• Beavertail Keel – 5’
• Cherry Interior Wood
• Aria Granicoat Counters in Galley & Head
• Ultra Leather Admiral Blue in Salon
• Mattresses Fore & Aft Cabins
• Teak Toe Rail
• Teak Cockpit Table
• Teak Cockpit Coamings
• Windlass at Bow
• Deck Washdown at Bow
• Electric Housetop Winch Main Halyard Winch
• 2000W Inverter w/ Remote Panel
• 5 Cabin Fans ( FC, MC, AC, Galley & Nav )
• Electric Head – Sea Water
• Microwave Oven at Galley
• VitroFrigo Frig / Freezer Drawers
• Dry Storage option at Galley
• Marine Air Conditioning – 1 unit
• DuctWork Added for Forced Air Heat
• Bow Thruster
• Coastal Electronics Package - Speed, Depth, AWI Autopilot, 9” GPS Plotter
  COASTAL CRUISING ELECTRONICS PACKAGE, INCLUDES;
  • RAYMARINE i70s INSTRUMENTS, 2 DISPLAYS, KNOT/DEPTH/TEMP/AWI WITH
    TRANSDUCERS MOUNTED ON COMPANIOWAY POD
  • RAYMARINE RAY 63 VHF RADIO MOUNTED AT NAV STATION
  • RAYMARINE RAM MIC MOUNTED AT STARBOARD HELM
  • RAYMARINE AXIOM 9+ MOUNTED IN ARTICULATING NAV POD IN COCKPIT
  • RAYMARINE SMART PILOT BELOW DECK AUTOPILOT, p70 DISPLAY AT HELM
  • FUSION STEREO WITH INTERIOR AND EXTERIOR SPEAKERS
• Spinnaker Gear Option – Halyard / Rail Pad Eyes, Sheets, Blocks
• Telescoping Whisker Pole w/ Pole Lift / Track
• Jib - Self Tacking Dacron
• Reacher - Sail Dacron
• Mainsail - Full Batten Dacron /w Track Slide system
• Mainsail Cover Toast Sunbrella
• Dodger- Toast Sunbrella w/ Side Rails
• Bimini – Connector to be added
• Pedestal and Wheel covers (2)
• Cockpit cushions (4)
• Freight / Commissioning
• Docking (dock lines, fenders) Safety (lifejackets, throwable, flares, USCG plaques) & Anchor Package 20 ft chain / 200 ft rode
• Single hand package - Single main and jib sheet to Helm and House

ACCOMMODATIONS & STORAGE

• Forward cabin with storage lockers, hanging locker, shelves and dovetail drawers

• Approximately 78” x 64” berth in forward cabin with quilted mattress

• Furniture grade main cabin settees and seats with contoured cushions

• Maple cabinets with ventilated raised panel doors throughout main salon

• 76“ long sofa style port main cabin settee with slide out extension to form double berth on starboard side

• Large storage outboard of main cabin seat backs

• Forward-facing navigation station with chart storage and drawers

• Navigation cabinets with installation space for extensive electronics

• Aft cabin with lockers, hanging locker, and shelves

• Full width 78” x 56” double birth in aft cabin with quilted mattress

• Storage below berths

• Sail & Anchor locker forward

• Cockpit seat locker

• Cockpit lazarette hatches port and starboard

• Propane gas bottle storage in cockpit for two 10 lb. (5 kg) tanks

VENTILATION

• (6) stainless steel unlimited offshore CE approved deck hatches

• (12) cabin side mounted stainless steel opening port lights with fly screens

• (2) cockpit mounted stainless steel opening port lights with 10

• (2) 4” chrome dorade vents with stainless steel guard

• Lexan sliding companionway hatch with solid teak hatch doors and trim

DECK

NPG Isophthalic gelcoat

• Infused epoxy modified vinylester deck

• CNC computer cut sealed end grain balsa coring

• Locally reinforced at high load areas

• Molded nonskid surface on working areas

• All deck penetrations made into solid fiber glass “core windows”

• 6061 T6 aluminum backing plates added at lamination for all loaded hardware

• Inward facing hull flange with integrally molded 6061 T6 aluminum bar forming a full length backing plate for

   hull to deck joint

• Hull to deck joint fasteners, stainless steel to meet or exceed ABS standard for offshore use

• Hull to deck joint bonded with 3M 5200 adhesive sealant

HULL

• NPG Isophthalic gelcoat

• Infused epoxy modifid vinylester hull

• Locally reinforced at high load areas

• Closed cell synthetic foam hull coring

• Resin infused hull laminated in “one shot” eliminating secondary bonding of structural materials

• Interior surfaces painted out with enamel gelcoat for aesthetics

• Internal structural grid designed to carry rig and keel loads, glass taped into hull

• UL and ABS approved, corrosion free Marelon flush thru hull fittings

• All hull penetrations made into solid fiber glass “core windows”

• Built to meet ABS Plan Certification

• Transferrable 15-year hull structural and blister warranty

KEEL & BALLAST

• Deep fin, beavertail bulb design, or keel/centerboard configuration

• Antimonial hardened lead ballast keel

• Template ground for fit and maximum performance

• Faired and epoxy coated

• Keel is thru-bolted to hull with cast in place stainless steel bolts

• Keel bolt quantity and size exceed ABS standard for offshore use

RUDDER & STEERING SYSTEM

• Twin wheel system using cable style radial steering

• (2) custom pedestals with integrated electronics mounting

• (2) 30” stainless steel wheels with leather covers

• (2) stainless steel pedestal guards

• Single level engine control with removable handle

• (2) 4-1/2” (114 mm) flush mount compass with cover

• High density, closed cell urethane foam rudder blade with modified epoxy reinforced skins

• Carbon fiber rudder post autoclave molded for high strength and low weight

• Gator rudder post seal

• Self aligning roller rudder bearings

• Emergency tiller

ENGINE & MECHANICAL

• 40 hp diesel with sail drive with three bronze blade folding prop

• 40 gallon fuel tank capacity with remote gauge

• Fuel filter/ water separator

• Lead lined engine insulation

• Engine service access front, top, sides, and aft

ELECTRICAL

• Batteries: (2) Group 31 AGM house batteries, (1) AGM Group 27 emergency start

• 30 AMP battery charger

• Polished chrome and stainless steel interior lighting

• Automatic lights in hanging lockers, main cabin lockers, and refrigerator compartment

• Service lighting in engine compartment and deck lockers

• Directional reading lights at berths and main cabin settees

• Directional spotlights over main cabin table

• Recessed, dimmable spotlights in main, forward, and aft cabins

• Interior, cockpit, and swim platform courtesy lighting

• (1) 30 AMP shore power services

• 110 VAC digital metered distribution panel

• 110 VAC shore power outlets in each cabin with GFI protection

• 12 VDC & 110 VAC digital metered distribution panel

• Battery selector switch

• Electrical bonding switch

• Electric sump pump with automatic float switch for icebox and shower drains

• Electric bilge pumps with automatic float switches and manual override

• High water bilge alarms

• UL approved, stranded, tinned copper wiring

• Wiring bundled in PVC conduit with room for future installations

• All wiring chafe protecteed where it passes through internal structure

• ABYC compliant color coded wiring throughout

• USCG approved navigation lights on bow rail, stern rail, and mast

GALLEY & PLUMBING

• 3 burner Force 10 gimbaled LPG stove with oven and broiler

• LPG sniffer with automatic shut off

• Maple faced cabinetry with raised panel access doors

• Maple faced, dovetailed cutlery drawers

• Molded 9” deep double sinks with premium marine grade galley faucet and manual foot pump with swivel     spigot

• Granicoat solid surface galley countertops

• Storage under galley sink through ventilated raised panel cherry doors

• Two drawer stainless steel 12 VDC/110 AC refrigerator

• Hot and cold pressure water with service access to pump and plumbing

• Polythylene tubing and Whale mechanical fittings for freshwater plumbing

• All below waterline hose connections are double clamped with stainless steel hose clamps

• Premium marine grade hoses used throughout

• 100 gallons of freshwater tankage with distribution manifold

• 6 gallon water heater, operates on 110 VAC or engine heat exchanger

INTERIOR

• Structural fiberglass timbers bonded to hull to carry mast and keel loads

• Structural bulkheads bonded to hull and deck

• Maple or pressure laminate faced bulkheads and risers

• Solid stock maple trim throughout

• Solid stock raised panel maple cabinet doors

• Solid stock raised panel maple passage doors in cherry door jambs

• Polished chrome mortised door lock sets

• Solid stock maple cabinet faces throughout

• Positive lock polished chrome cabinet hardware

• Solid maple face, dovetail joined, all wood drawers throughout

• Maple main salon table with Tartan logo inlay and centerline drawer storage

• Tongue and groove solid maple hull ceilings

• Easy maintenance molded FRP panels with varnished battened overhead

• Varnished teak and holly cabin sole with teak banded access hatches

• Varnished solid teak handrails placed for security in a seaway

• Interior woodwork sprayed with satin finish lacquer varnish

• Selection of designer fabrics for interior upholstery

HEADS

• Marine head with 24 gallon holding tank

• Deck pump out with vent

• Low odor premium marine grade sanitation hose

• Separate stall shower with Plexiglass enclosure and molded seat

• Shower drains to separate sump box w/ automatic overboard discharge

• Hanging/wet locker outboard of aft shower seat

• Premium marine grade head faucets and shower mixers

• Molded Granicoat solid surface counter tops with integral sink

• Utility storage under sink through raised panel maple door

• Solid maple face upper vanity cabinet with storage and flip up shaving mirror

SPARS & RIGGING

MAST

• Painted Aluminum mast with sheaves for (1) jib, (1) main, (1) reacher, and (1) spinnaker halyard

• Tapered airfoil swept spreaders

• 1x19 stainless steel wire rigging with forged turnbuckles

• Internal halyards

• Harken furler for self-tacking jib

• Mast to deck tie-rod to carry running rigging loads

• Masthead anchor light

• Steaming light with foredeck illuminator

• Mast wiring conduit

• Spartite mast sealing and chock system

BOOM

• Painted aluminum boom with stack pack system

• (2) single line reefs led aft to housetop winch

• Internal 4:1 outhaul

• Two-part boom topping lift

• Rod vang with tackle led aft

RUNNING RIGGING

• Low stretch main and genoa halyards

• Polyester double braid jib sheet and mainsheet

• Polyester double braid main traveler control lines

• (2) Polyester double braid reef lines

• (2) Reef lines

SAILS

• Fully-batterned mainsail with white Sunbrella sail cover

• Dacron self-tacking jib

DECK HARDWARE

• (2) Harken 46.2 STC (self-tailing chrome) primary genoa winches

• (2) Harken 40.2 STC (self-tailing chrome) aft house top winch

• (9) Spinlock rope clutches for aft sail control leads

• Harken self-tacking jib traveler with sheet led to housetop winch

• Harken aft lead control blocks

• Harken turning blocks at base of mast for aft sail control leads

• Harken mainsheet traveler with ended sheet led to housetop winch

• (3) Harken aluminum winch handles

• 27” x 1 1/8” diameter stainless steel stanchions

• 27” x 1 1/8” tube double stainless steel bow rail with navigation light

• 27” x 1 1/8” tube double stainless steel split stern rail with navigation light

• 1 x 19 double lifelines with port, starboard, and transom boarding gates

• Custom stainless steel stem fitting with integral double bow roller

• Teak toe rails through bolted to hull flange

• (4) custom cast rail mount chocks for mooring cleats

• (6) stainless steel 10” mooring cleats

• Custom stainless steel mast collar with multiple attachments for blocks

• (2) polished chrome 4” Dorades on teak Dorade caps with stainless steel guards

• Companionway hatch sea hood with instrument pod

• Match molded anchor locker lid with hatch

• Offshore ready, match molded, and gasketed cockpit seat hatches

• Deck drains to waterline discharge, eliminates hull streaking

• Teak housetop handrails

• Manual cockpit mounted bilge pump

• Hinge-down swim platform with a retracting stainless steel swim ladder

DESIGN DIMENSIONS

LOA.............................................................................................. 39.5 ft.

LWL............................................................................................ 33.25 ft.

Beam............................................................................................ 12.8 ft.

DRAFT

Fin.................................................................................................. 6.2 ft.

Beavertail..................................................................................... 4.83 ft.

Keel/Centerboard......................................................................... 4.25 ft.

DISPLACEMENT

Fin........................................................................................... 16,000 lbs

Beavertail................................................................................ 17,000 lbs

Keel/Centerboard.................................................................... 17,300 lbs

BALLAST

Fin............................................................................................. 5,500 lbs

Beavertail.................................................................................. 6,500 lbs

Keel/Centerboard...................................................................... 6,800 lbs

CAPACITIES

Fuel................................................................................................ 40 gal

Water........................................................................................... 100 gal

Auxiliary................................................................................ 40 hp diesel

Berths.................................................................................................... 7

SAIL DIMENSIONS

I, self tacking jib.......................................................................... 51.83 ft.

J, self tacking jib........................................................................... 15.0 ft.

I, Reacher...................................................................................... 57.0 ft.

J, Reacher .................................................................................. 16.42 ft.

P.................................................................................................. 50.75 ft.

E.................................................................................................... 16.0 ft

Total Sail Area, ST Jib........................................................ 794.725 sq. ft.

Mainsail Area....................................................................... 406.59 sq. ft.

Sail Area 150% reacher........................................................... 706.0 st. ft.

Bridge Clearance........................................................................ 62.58 ft.

PERFORMANCE RATIOS

Ballast/displacement............................................................................ 38

Displacement/length....................................................................... 206.5

Sail area/displacement (upwind) ....................................................... 19.3

Sail area/displacement (downwind) ................................................. 26.9

Designer ............................................................................... Tim Jackett

CE Approved for category “A” unlimited offshore

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.